[amf7]

Nor are you... Can you guys not hijack this thread..

[left888]

I did NOT bring it up, mr Latte did, Again!

[PzR Slim]

left888

I did NOT bring it up, mr Latte did, Again!

Well rather than making a song and dance about why not just report it to a mod and let them take care of it?

[left888]

***Sigh***

[Stones]

paskowitz

Getting CSPs anyway...

Here is a question... how to the CSRE Ps work out of the box (as in how is the default position, easiness to connect, how well do they rest on the ground, etc)? Simple stuff.

I used them quite a bit before I did the inversion of the clutch and brake pedals. They are very solid on the ground and w/o changing any of the adjustments, they work just fine, but, like you said, you're "Getting CSPs anyway"

[Mr Latte]

Certain people on these forums were asked to avoid my posts and ignore them
I even believe they agreed to do so?

They should do so as of now...

As for me, I am fully entitled to reply and appose the accusations put to me by certain individuals, am I not? Particulary as they provide no evidence to their claims yet this post was a snippet of my own evidence against such claims/doubts made. Besides my post was regarding the CSRE pedals, which I believe are on topic for this thread.

I call it using my "freedom of speech" and in modern society a man is innocent until proven guilty.
My legal team have advised me to say no more.

[left888]

Mr Latte

My legal team have advised me to say no more.

thank you, thank you, thank you

[superbike81]

paskowitz

Getting CSPs anyway...

Here is a question... how to the CSRE Ps work out of the box (as in how is the default position, easiness to connect, how well do they rest on the ground, etc)? Simple stuff.

I built my rig around the CSR-E pedals, so I didn't adjust them at all. Everything felt very natural at the angle I have it at, I doubt I'll even mess with an inversion kit (although I may in the future) because they feel great as is. The only adjustment I ever make is the load cell adjustment on the brake.

[lemansfanatic]

Nastradamus87

It seems apparent that they are shifting their focus to the CRS-E due to production limitations. Since the CRS-E and CSW share components and they are focusing on the CRS-E, I don't expect CSW's to start rolling out until they have increased production capacity to the point where demand for the CRS-E has been met. That being said, there are too many variables (production capacity, demand for CRS-E, etc.) to assume the CSW will be launching in the immediate future (the next one or two months).

Also, Thomas didn't specify a new launch window for the CSW. If the new launch window was obvious he probably would have told us what it would be.

I'm not in too much of a rush, though. I'd rather they take their time and have a smooth launch of both wheels.

As are everyone, when you spend that much money you should expect everything to be perfect, Fanatec knows this and thats why they're smart not to get ahead of themselves, but throw us a bone here, all we want are the OTHER details, if you can't give us a date okay, hopefully Thomas will answer the questions emailed to him so we can make a decision for ourselves about whether we should wait until the indefinate future for the CSW, or just buy a CSRE now...

[superbike81]

I wouldn't buy the CSR-E now anyways. I think I remember it has interchangeable wheel options, but not with the quick release like the CSW. Honestly that quick release function is a big selling point for me. I can put both of my wheel attachments hanging on the side of my rig and having the wheel removed will make getting in and out MUCH easier. I've got the standard CSR wheel to hold me over for now, but the more I read about (and drool over) the CSW and its F1 and GT wheel attachments, the more I hate my CSR.

[Nastradamus87]

superbike81

I wouldn't buy the CSR-E now anyways. I think I remember it has interchangeable wheel options, but not with the quick release like the CSW. Honestly that quick release function is a big selling point for me. I can put both of my wheel attachments hanging on the side of my rig and having the wheel removed will make getting in and out MUCH easier. I've got the standard CSR wheel to hold me over for now, but the more I read about (and drool over) the CSW and its F1 and GT wheel attachments, the more I hate my CSR.

I feel the same way for the exact same reasons. Unless you need xbox support, there is much of a reason to get the CSR-E over the CSW, is there?

I haven't had much interest in racing F1 cars on my G27, but with a CSW, F1 rim, and CSP, I can imagine myself getting very much into it.

[Crispy]

left888

I did NOT bring it up, mr Latte did, Again!

He brought up how that person was accusing him. You brought up the argument. If your going to troll, don't do it here.

[left888]

Crispy

He brought up how that person was accusing him. You brought up the argument. If your going to troll, don't do it here.

Why did he bring up how some person was accusing him? and why are you bringing this up? If you are trying to create drama with me I suggest you send me a PM rather then continue in the forum.

[bugsbunny]

Nice videos but will this work with 100% compatibility for PS3's GT5

For the CSW , will the steering be as accurate and as precise as a T500 RS when used on GT5? or at least as instantaneous in steering as a Driving Force GT in steering because I hate steering wheels that are expensive but still have a tiny lag which has a huge effect when your driving , even the smallest lag on steering I wouldn't buy any steering wheel.

[superbike81]

bugsbunny

Nice videos but will this work with 100% compatibility for PS3's GT5

For the CSW , will the steering be as accurate and as precise as a T500 RS when used on GT5? or at least as instantaneous in steering as a Driving Force GT in steering because I hate steering wheels that are expensive but still have a tiny lag which has a huge effect when your driving , even the smallest lag I wouldn't buy any steering wheel.

Which higher-end wheels have you experienced this "lag" with? When you say "lag" are you talking about a deadzone? I've used the T500RS, a few different Fanatec wheels, the G25, and the ECCI 6000, DFGT, and never had any problems like you are talking about.

If you are mistaking lag for a deadzone, in most games the deadzone is adjustable.

[TB]

Mr Latte and left888 - I would really hate to have to drag out the Warning hammer. Please either let this scuffle end or if even that's a problem, do me a favor and add each other to your respective ignore lists. Go to View Public Profile, then under the User Lists (found right under their name) you'll find Add to ignore list. Thanks.

[scoddee]

left888

Why did he bring up how some person was accusing him? and why are you bringing this up? If you are trying to create drama with me I suggest you send me a PM rather then continue in the forum.

The question is why does left888 continually try to dictate what Mr Latte, Crispy, myself and god knows who else can post in this forum ? I am glad to report that it has not seemed to have put a damper on any of us, lol.

Looking forward to your Fanatec product reviews Mr Latte.

Scotty

[left888]

scoddee

The question is why does left888 continually try to dictate what Mr Latte, Crispy, myself and god knows who else can post in this forum ? I am glad to report that it has not seemed to have put a damper on any of us, lol.

Looking forward to your Fanatec product reviews Mr Latte.

Scotty

Once again scodee puts in his 2 cents of trollism 101, congrats little man!

[Crispy]

^Let it be, please. If anything your the one instigating everything with trolling posts, then calling us trolls when we try to defend us and our friends. Please, if you have nothing nice to say, don't say it.

For the record, Mr Latte brought it up because this was the thread to post up the respected content he provided, which was the adjustment of the CSRE Pedals. He defended himself and his credibility from being accused of bias towards a specific company. This is clearly not true as he's praised Thrustmaster and Logitech before.

[left888]

I have tried unsuccessfully for more then a week now to get all this BS stopped. Every time mr Latte post he makes reference to someone attacking him. I tried to apologize to him, three times for the small part I had in all this. He told me to shove it.

In a PM from him he told me he likes toying with people. Many people have PM me in my defense because I tried defending someone mr latte bullied.

I have always said I could care less what brand anyone owns, I have Fanatec and Thrustmaster gear, yet I am accused of attacking mr latte about being biased over something or another. I only defended a member who complained about faulty Fanatec gear. Mr latte jumped all over this member and told him he could not say this in the forum.

I said free speech should be allowed, mr latte said shove it. Now everytime he posts here he make trollish remarks about being attacked. Go and read the threads and see for yourself and also note scodee's trollish remarks as well.

This needs to stop right here right now!!!


***Edit***, but it won't stop right here right now, mr latte or scodee or someone else will jump in and keep it going.