[B class 1 lap race] Integra HSR setup

  • Thread starter Simracer
  • 6 comments
  • 5,215 views
Hi, here's my setup that got me the gold in the B class 1 lap HSR race

Engine:0
Weight:100

ride height:-30 both
springs: 7both
shocks: 5both
toe: +0.20 -0.15
camber:1.8 1.2
final ratio:5.500
6th gear:0.807

feel free to improve
 
hi Simracer,

was struggling with this one, your set up worked a treat thx very much.
just changed one thing,

6th gear 0.800

with

max angle -- 40

traction control -- off

abs -- 3

transmission -- auto

active -- off

physics -- standard

asm -- off

line -- off
 
thanks, actually I'm playing with the wheel so things might be slightly different with the pad.

feel free to improve of course ^^ just getting started in GT5p
 
Thank you Simracer. I've been using your setup online 500PP racing with a LOT of success.
 
Thank you for taking time to share the information. I was struggling with only 2nd place finishes on this driving mission until I applied these settings. My Evo responded much better afterward carrying me to a 1st place finish with about a .5 second margin. If I took time to run it again, I could probably do even better. Cheers!
 
Back