Hm. i wouldn't use this filter then. It has nearly no ambient light, therefore you have this crazy contrast of sun and shadows. You tried the _Sol filters already?Hi Peter!
Poor knowledge/choice of words aside (also, I was describing from memory), this is what I was talking about.
I normally run in overcast conditions. Below is a direct comparison where 2d lightning seems more logical to me. Also, the sky pretty much grey/ish (12:50 am), but not dark by any means. 3D segment looks like taken at 22:00.
Is there a slider to diminish shadow intensity? In both cases casted shadows are still closer to black than anything else.
I'm using ClimaxF1 ppf, by the way.
View attachment 1099820
This is the sky tone, by the way:
View attachment 1099821
This is coming from that one I suppose and is an older feature:Live weather works for me, i dont know if it is dynamic for the session ,but at least it starts the session with the current weather for the locale
??! I think this has nothing to do with Live Weather hasn´t it?
Please tell us more about this "the car can go lower at speed and if you press a button rapidly it 'jumps'..."with my bad english we misunderstood, here is the right answer:
it just uses live weather for a single player races, more like an example at this stage
like, if you have a 2 hour race with it and during that race rain starts, you’ll see rain in AC
the circuit must have the GPS coordinates in the data for it to work
Yeah buddy that´s what I´ve understood so far, but unfortunately it does not work yet, meaning we only have a dark blue sky with some dramatic black clouds all the time around, but the weather does not change at all. So I suspected there is something more to install or to prepare to have it work properly. Just try it out by yourself - choose a track where it rains currently for example and start a session with that controller activated.with my bad english we misunderstood, here is the right answer:
it just uses live weather for a single player races, more like an example at this stage
like, if you have a 2 hour race with it and during that race rain starts, you’ll see rain in AC
the circuit must have the GPS coordinates in the data for it to work
One question: how do you disable AE? Editing the ppfilter? Just change the value from 1 to 0 in "enabled" or do you have to do something additional in Sol config?3D clouds seem to have improved but still don't have the variety of the 2D skyboxes, and still look kind of fake to me. I'm guessing there won't be a 2D cloud option with Pure?
My biggest concern though is Pure's reliance on autoexposure, as it's the first thing I turn off in PP filters. In VR you're constantly moving your view, looking left and right at mirrors, and even over your shoulders at times. With AE active the light levels outside change with head movement as if someone is pissing about with a dimmer switch. Fake AE isn't needed, especially in first person view and especially in VR. Our eyes are superb at doing it properly themselves.
Thanks Peter - will Pure have a 2D cloud option?The AE problem is fixed with the next CSP and Pure version. In bright light, AE is nearly bypassed. AE is only working for low light, where the different shape of cars (which is the main problem in VR) doesn't matter.
So with the next bundle of CSP and Pure, many of these problems are fixed.
Yes, by editing the PP filter as you suggest, changing the 1 to 0.One question: how do you disable AE? Editing the ppfilter? Just change the value from 1 to 0 in "enabled" or do you have to do something additional in Sol config?
This is exactly the clouds when you choose the live controller as a weather script.Thanks Peter - will Pure have a 2D cloud option?
Talking of clouds, the 'Windy' 2D clouds used to be a lot more moody and carry more of a visual threat of rain - have they changed at some point? The dark grey rain in them seems to have gone.
Your old 'Autumn' preset used to be even better, really dramatic.
Is it possible to get some dark moody rain clouds added back to the 2D Windy weather?
This is what 'Windy' used to look like but now the clouds seem a lot lighter and whiter and not a lot different to some of the other cloud presets.
View attachment 1099831 View attachment 1099832
(I've asked this a couple of times on your discord in the past but didn't get a response)
Schweet little car. Lotso fun. I like that you almost always fix these display issues.Here's a super little beastie from André Simão, the Abarth 595 Pista 2017
View attachment 1099839 View attachment 1099840
Abarth 595 Pista | Modpack Portugal
www.modpackportugal.pt
There's a VR fix for the digital instruments:
Swap these fields into data/digital_instruments.ini:
[ITEM_0]
VERSION=2
PARENT=DISPLAY_DATA
POSITION=-0.000015,0.025939,0.014
TYPE=SPEED
SIZE=0.025
COLOR=255,225,255
INTENSITY=4
FONT=599_big
ALIGN=CENTER
UNITS=KMH
[ITEM_1]
PARENT=DISPLAY_DATA
POSITION=0.035,0.0328,0.015
TYPE=AMBIENT_TEMP
SIZE=0.0085
COLOR=255,255,255,255
INTENSITY=2.7
FONT=e92_big
VERSION=2
ALIGN=CENTER
[ITEM_2]
PARENT=DISPLAY_DATA
POSITION=-0.006,-0.0250,0.014
TYPE_EXT=DRIVEN_TOTAL
INPUT=DRIVEN_TOTAL
NUMBER_FORMAT=06.0
SIZE=0.009
DECIMALS=2
COLOR=255,255,255,255
INTENSITY=2.7
FONT=e92_big
VERSION=2
ALIGN=RIGHT
[ITEM_3]
PARENT=DISPLAY_DATA
POSITION=-0.006,0.0020,0.014
TYPE_EXT=DRIVEN_SESSION
INPUT=DRIVEN_SESSION
NUMBER_FORMAT=03.0
SIZE=0.009
DECIMALS=2
COLOR=255,255,255,255
INTENSITY=2.7
FONT=e92_big
VERSION=2
ALIGN=RIGHT
[ITEM_4]
PARENT=DISPLAY_DATA
POSITION=-0.0055,-0.0111,0.014
TYPE_EXT=DRIVEN_SESSION
INPUT=DRIVEN_SESSION
SIZE=0.009
DECIMALS=2
COLOR=255,255,255,255
INTENSITY=2.7
FONT=e92_big
VERSION=2
ALIGN=RIGHT
Thanks!! Fixed Shaun Clarke's Ginetta windshields...Extra FX settings are very dependent of your graphic card, as there are a lot of options there, that require specific graphic card generation (like RTX for example). I use it exclusively for "temporal anti aliasing" because it reduces white jaged lines on textures, "sample spread" set at 10% (and have extra sharpness turned of as per advice from Ilya under the setting). Everything else I turned of, cause it looked worse on my graphic card (RX-570) as you said or it had near zero influence on how things looked and it was only eating my FPS. Oh, sorry just checked, i turned motion blur on in there aswell and turned of the one in AC default settings, cause it looks better. Reduced it 30% though.
And just a note. Some mod cars, that are based on old mods or old cars will have a strange windscreen problem if you have temporal anti aliasing enabled. It will look like the screen is dirty, grainy and will lag a bit. This is because Kunos in later updates changed how glass shaders should be named: outher glass shuld be PerPixelReflection, inner should be ksWindscreen. Before it was different for internal glass. You must change this for every car that has this problem by creating an extention file inside the folder: ...\Document\Assettocorsa\cfg\extension\cars. You can find this by searching this thread. it's been explained many times how to do. Even I was writing about it a couple of times. These cars are becoming rare this day, but still there are quite a few out there.
EDIT:
Found one such post of mine. The name of the ini file has to be exactly the same as the car folder name in AC content/cars folder. Here's the file for Porsche 961 LM for example: https://www.gtplanet.net/forum/threads/assetto-corsa-pc-mods-general-discussion.307899/post-13250714
hey sorry missed your message.@lorelord, I'd like to ask two things:
1) Where can I download your stuff? I'm really interested in your mods, especially the 2000's GT1 pack.
2) I'm probably miscounting, but if you combine your GT1 pack & Legion's, there's only 23 cars (11 from Legion & 12 yours). Where have I gone wrong counting them up?
Magnificent Park has been updated to v1.1. Please check the changelog I added to the original post for details.Magnificent Park v1.1 (link updated)
Converted from rFactor and rFactor2.
View attachment 1099564
Fictional track in France.
- 32 pit/start
- CSP required
- AI, cam
- 3 layout
Credits & Thanks;
・ @HarySeb , the author of the rFactor version and and Thank you for gave me permission
・ @Nibiru , conversion to rFactor2
・ @shi (shin956), Track convert
・ @RMi_wood , Cooperation
・ @Viola_seven , AI
This track consists of an rFactor1 version and an rFactor2 version.
The base International/National layout was converted from the rFactor1 version.
Converted and combined parts of the Enduro layout from the rFactor2 version.
The reason I didn't convert everything from the rFactor2 version is because the wall billboards on the walls were omitted.
Enjoy.
-------------------
v1.1 changelog;
-Fixed shaders for windows and fence. Thanks to report by @Masscot .
-Fixed pit surfaces. Thanks to report by @ApexVGear .
-Added ai_hints.ini. Thanks to report by @mrtomcat66 .
-Fixed semaphore.ini.
-I deleted the old Balloon and replaced it with a new one.
-Fixed the mapping of the Michelin Bridge . Also changed the texture to the one created by @Masscot . Thanks.
-Changed the preview of the enduro and international layout.
-Fixed the mapping of some billboards.
-Fixed cone normals.
-I also added groove to the enduro layout section. Thanks for the suggestion by @KevinK2 and @Masscot .
circuito_de_jerez_2010 working fine on my side (CSP 0.1.76 preview 136)Jerez_2010 makes my AC crash, pop-up says that there's a broken spline...![]()
No problem for me. CSP 0.175. I did a championship race the other day.Jerez_2010 makes my AC crash, pop-up says that there's a broken spline...![]()
Updated CSP and still happening. If I managed somehow to corrupt the track files I deserve an applause.circuito_de_jerez_2010 working fine on my side (CSP 0.1.76 preview 136)
That might be due to the age of the mod, some mods out there haven't been updated in a long while and will be missing things including sound. Have you tried other cars to see if they still have sound?Has anyone experienced this problem before with this or other cars? Its my first time I have this problem after 1500 cars in garage haha.
Thanks for help.
Road Atlanta sans chicane, and with the Dip?
Idk what Christmas will bring, but this is the bridge at Road America... 🙂Road Atlanta sans chicane, and with the Dip?
I'm running a race there on Sunday, how early?
Thanks!Yes, by editing the PP filter as you suggest, changing the 1 to 0.
Yeah, Road America T6 and a track skin would have been my other guess.Idk what Christmas will bring, but this is the bridge at Road America... 🙂
Yes i have some wishes for Santa toohallo guys,
can someone make some improvements for the Autobahn track?
![]()
a little grass,trees or forest and maybe tarmac would be nice. the track still looks a lot like 2016.
Thank you!
racedepartment autobahn 0.3