GT Sport SVG request thread (Please read 1st post)

  • Thread starter daan
  • 10,544 comments
  • 528,119 views
Hello again!

I am back with yet another Tails request! Two this time but again I am not sure if it will be possible to be done.

Flight School Tails.jpg


I am looking to get this new version of the Miles Prower logo (not me modelling btw!) with the trademarks tails and if possible separate Flight School 92 logo, I don't need the Japanese part of the lettering just the main Flight School 92.

Tails 25th.jpg


The other request is the above, ideally I would want the logo without the 25th anniversary but not sure if possible since that part would have to be redone and Tails chest fur redrawn.

Again it's for a special idea I have for my long term fanboy of liking Tails and full credit will be given if the decals can be done when I share in game.

Thank you in advance for effort/reading!
 
Hello everyone. Can anyone help with this logo. If possible, I'd need 2 .svg files, one of the logo and one of the text. Any help is greatly appreciated!
 

Attachments

  • WhatsApp Image 2020-04-29 at 15.49.43.jpeg
    WhatsApp Image 2020-04-29 at 15.49.43.jpeg
    17.9 KB · Views: 12
  • WhatsApp Image 2020-04-29 at 15.49.44.jpeg
    WhatsApp Image 2020-04-29 at 15.49.44.jpeg
    9.1 KB · Views: 12

Attachments

  • Trigion.logo.01.svg
    955 bytes · Views: 11
  • Trigion.logo.00.svg
    3.1 KB · Views: 11
  • Trigion.logo.02.svg
    2.3 KB · Views: 10
  • Trigion.nl.svg
    2.6 KB · Views: 11
  • MCL-Racing.com.svg
    3.8 KB · Views: 12
  • MCL-Racing.svg
    2.2 KB · Views: 11
darth_tails
Hello again!

I am back with yet another Tails request! Two this time but again I am not sure if it will be possible to be done.

View attachment 916053

I am looking to get this new version of the Miles Prower logo (not me modelling btw!) with the trademarks tails and if possible separate Flight School 92 logo, I don't need the Japanese part of the lettering just the main Flight School 92.

View attachment 916054

The other request is the above, ideally I would want the logo without the 25th anniversary but not sure if possible since that part would have to be redone and Tails chest fur redrawn.

Again it's for a special idea I have for my long term fanboy of liking Tails and full credit will be given if the decals can be done when I share in game.

Thank you in advance for effort/reading!
Click to expand...

Here you go !
I also did the Japanese text, cause I wanted to do the full version, and splitted the decal in multiple parts for you.

#Edit : Just fixed the text
 

Attachments

  • Miles Prower.02.svg
    3.2 KB · Views: 12
  • Miles Prower.01.svg
    14.7 KB · Views: 12
  • Miles Prower.03.svg
    2.7 KB · Views: 12
  • Miles Prower.04.svg
    602 bytes · Views: 12
  • Miles Prower.00.svg
    10.2 KB · Views: 12
Last edited:
CayenneGTS
Hello everyone. Can anyone help with this logo. If possible, I'd need 2 .svg files, one of the logo and one of the text. Any help is greatly appreciated!
Click to expand...
Here you go.
 

Attachments

  • fanatic all.svg
    7.4 KB · Views: 12
  • fanatic logo.svg
    4.4 KB · Views: 10
  • fanatic txt.svg
    5.2 KB · Views: 10
Lebowski
Hi decal dudes, i need a few making up please. First up though, i've tried getting as many images of the text decals as possible and it proved near impossible so i've only got pictures from the actual car.

So first up is this dog called Bella. Please note, the eyes are bolts on the wing so please do not reproduce them! I would like the 2 components made separate of eachother please - face and name as individual files.

View attachment 915751

Next is this RS1 decal
View attachment 915752

Then from this picture i need "Porsche Colorado Springs". That line only please, not with the PORSCHE above it! Then I will also be needing the ""Redefined" logo on the bumper as is shown (black with the 2 white parts)
View attachment 915753
View attachment 915754

My thanks in advance! :D
Click to expand...


Anyone able to help with these please?! 👍
 
Can i also have 2 versions of this please? One as shown in black and red and another changing the black for blue please ("one" still in red). Thank you!

cropped-logo.jpg
 
Lebowski
Anyone able to help with these please?! 👍
Click to expand...

Difficult, at least for me, the quality of the pictures is a bit too low.

The redefined logo is nearly impossible to scan, the RS1 logo, too. At least I see here a workaround for you. If you use a 911 Logo, black out the 91 and ad a RS logo you should be able to get a sharp result.

I tried my best with poor Bella, this is how she came out:

Screenshot_20200430-174010.jpg


Tried to replicate the bella text, unfortunately hardley scanable. Replaced with a fonts:

Screenshot_20200430-175016.jpg


At least the Porsche Colorado logo came out decent. Attached you will find the three files.
 

Attachments

  • image2vector - 2020-04-30T174122.336 (1).svg
    9.8 KB · Views: 12
  • image2vector - 2020-04-30T175118.657 (1).svg
    2.4 KB · Views: 13
  • image2vector - 2020-04-30T174540.722 (1).svg
    8.4 KB · Views: 13
I need some help with converting these .pngs to .svgs. The crow and the Crow Works text being separate logos. Thank you in advance!
Betty120-2.png


logo.png
 
ringkurier
Difficult, at least for me, the quality of the pictures is a bit too low.

The redefined logo is nearly impossible to scan, the RS1 logo, too. At least I see here a workaround for you. If you use a 911 Logo, black out the 91 and ad a RS logo you should be able to get a sharp result.

I tried my best with poor Bella, this is how she came out:

View attachment 916175

Tried to replicate the bella text, unfortunately hardley scanable. Replaced with a fonts:

View attachment 916176

At least the Porsche Colorado logo came out decent. Attached you will find the three files.
Click to expand...

They are fantastic, thanks very much! Did your suggestion with the RS1 - worked a treat, why didn't I think of that?!

I have found some better images of "Redefined" if that helps? If you could do it as shown on the car that would be great please and also i have these "Friction One" decals too please. Can i have 2 versions of this please? One as shown in black and red and another changing the black for blue please ("one" still in red). Thank you!
Screenshot_20200430-180244.jpg
Screenshot_20200430-162541.jpg
cropped-logo.jpg
 
Lebowski
They are fantastic, thanks very much! Did your suggestion with the RS1 - worked a treat, why didn't I think of that?!

I have found some better images of "Redefined" if that helps? If you could do it as shown on the car that would be great please and also i have these "Friction One" decals too please. Can i have 2 versions of this please? One as shown in black and red and another changing the black for blue please ("one" still in red). Thank you!
View attachment 916194 View attachment 916195 View attachment 916196
Click to expand...


I have already the Friction One in two versions for you.

The other may need some more crafting, hope I can deliever them later in a acceptable quality.
 

Attachments

  • image2vector - 2020-04-30T195151.532 (1).svg
    14.8 KB · Views: 13
  • image2vector - 2020-04-30T195242.189 (1).svg
    11.5 KB · Views: 13
ringkurier
And there is the other one. Found a good logo of them which was easy to convert.

3 Versions - Black, White, Blue

Have a good day!
Click to expand...

Fantastic, thank you very much! Any chance you could do the black one with the highlights in white instead of red please? Only the red wont show on the finished design!
 
Lebowski
Fantastic, thank you very much! Any chance you could do the black one with the highlights in white instead of red please? Only the red wont show on the finished design!
Click to expand...

I've tried. To make sure I didn't lost something in translation, two versions:
 

Attachments

  • image2vector - 2020-04-30T220745.332 (1).svg
    10.7 KB · Views: 12
  • image2vector - 2020-04-30T220943.545 (1).svg
    10.6 KB · Views: 12
Higny
Here you go !
I also did the Japanese text, cause I wanted to do the full version, and splitted the decal in multiple parts for you.

#Edit : Just fixed the text
Click to expand...

Thank you for your work! I am at the office just now so I will not be able to check until I get home but that will make a good start to my weekend and I will share the works in due course since I am now up to 40 liveries sitting waiting to publish so many nice decals of late and many design ideas...
 
AMVI request

Got somthing i made for my AMVI GTA crew and would love to have them in gt sport too :)
 

Attachments

  • AMVI187.png
    AMVI187.png
    14.8 KB · Views: 11
  • AMVI187-.png
    AMVI187-.png
    25.2 KB · Views: 12
o9lifted
AMVI request

Got somthing i made for my AMVI GTA crew and would love to have them in gt sport too :)
Click to expand...

Hey, I guess this will be tricky. Everything has to be handdrawn to get your file somehow under 15kb or the quality is so bad, that you hardly could recognize it.

I suggest you simplify your design a bit and then we can have a look how to get them under this stupid limit.

Edit: Got your Coat of Arms somehow under the limit. Have fun!
 

Attachments

  • image2vector - 2020-05-01T142647.830 (1).svg
    12.9 KB · Views: 11
  • image2vector - 2020-05-01T142740.401 (1).svg
    13.3 KB · Views: 11
Last edited:

Latest Posts

Back