GT Sport SVG request thread (Please read 1st post)

  • Thread starter daan
  • 10,544 comments
  • 525,567 views
@Maninashed @krisduv managed to get it uploaded....

However I learned something new today....you can upload to the decal uploader on GTS site from tour phone...had to install Opera and change to desktop.....only taken me 3yrs to find that out ....thanks Liner32...

Mind blown today
 
Got some decals to convert into SVG format to complete my replica of the #19 Pro-Am entry from FFF Racing Team in GT World Challenge Europe.

Kiku-Masamune Sake - I would like both the vertical and horizontal logos below transparent.
Vertical
p1tzxyfFMGsZOTXjlOSngipd6VCLPGBo9zx15IG_ippLrM3O14J0z3_1kKC-eEC6wUpiKTYguhdQJZAmwbbfW4pH6GHzE5lIfm9ddZh-ktZaWbn5BHlzRwWdM7nslA

Horizontal
logo.png


I'd also like these driver names in both white and black below, with their respective country flags.
FFF #19 Drivers (WHITE).png

FFF #19 Drivers (BLACK).png


Thank you in advance if you get them done!
 
Got some decals to convert into SVG format to complete my replica of the #19 Pro-Am entry from FFF Racing Team in GT World Challenge Europe.

Kiku-Masamune Sake - I would like both the vertical and horizontal logos below transparent.
Vertical
p1tzxyfFMGsZOTXjlOSngipd6VCLPGBo9zx15IG_ippLrM3O14J0z3_1kKC-eEC6wUpiKTYguhdQJZAmwbbfW4pH6GHzE5lIfm9ddZh-ktZaWbn5BHlzRwWdM7nslA

Horizontal
logo.png


I'd also like these driver names in both white and black below, with their respective country flags.
View attachment 943849
View attachment 943848

Thank you in advance if you get them done!
 

Attachments

  • driversblack.svg
    12.2 KB · Views: 10
  • driverswhite.svg
    12.4 KB · Views: 9
  • hor.svg
    7.2 KB · Views: 12
  • ver.svg
    8.5 KB · Views: 11
I was wondering if it would be at all possible to convert these into svgs??
 

Attachments

  • MK Sub-Zero4.jpg
    MK Sub-Zero4.jpg
    29.7 KB · Views: 10
  • Tora.png
    Tora.png
    10 KB · Views: 9
  • Mini_ninjas_conceptart_HlIoc.jpg
    Mini_ninjas_conceptart_HlIoc.jpg
    24.4 KB · Views: 9
  • 1563189-tora.jpg
    1563189-tora.jpg
    9.3 KB · Views: 10
  • Mini-Ninjas-1.jpg
    Mini-Ninjas-1.jpg
    12.1 KB · Views: 9
  • 865457-mnscreenshot_hirofo.jpg
    865457-mnscreenshot_hirofo.jpg
    6.8 KB · Views: 9
  • Char_vignet_hiro.jpg
    Char_vignet_hiro.jpg
    14.4 KB · Views: 10
  • d4kqvxz-2510fdc5-23e3-48a9-a64d-e259a2b59ebd.png
    d4kqvxz-2510fdc5-23e3-48a9-a64d-e259a2b59ebd.png
    79.1 KB · Views: 9
  • 6765249-sub-zero.png
    6765249-sub-zero.png
    165.4 KB · Views: 9
  • subzero-fullsize2.jpg
    subzero-fullsize2.jpg
    71.8 KB · Views: 9
  • 3764_6.jpg
    3764_6.jpg
    33.8 KB · Views: 11
  • MK Scorpion.jpg
    MK Scorpion.jpg
    36 KB · Views: 10
@Maninashed Bit of a difficult request here:

Can you make an SVG of this highlighted blue shape seen in the Alphatauri livery? The Alphatauri logo seen inside the shape nor the text next to it wont be necessary btw.
20200727_101850.jpg
 
Gran Turismo®SPORT_20200726235407.jpg


I done my best to get a up close and clear photo of this "BTL" logo seen on the interior of the Beetle Gr.3.

The logo itself is a bit of a mystery but I thinking it a unique shorthand for BeeTLe that the VW designers created for the car.

Many thanks to anyone who can trace out of the logo. 👍
 
Hello once again! I would like these following decals converted into SVG format.

I have these driver names, in both black & white, with their respective country flags for both left & right sides of the roof pillar.
FFF #555 Imola Drivers (Left WHITE).png

FFF #555 Imola Drivers (Left BLACK).png

FFF #555 Imola Drivers (Right WHITE).png

FFF #555 Imola Drivers (Right BLACK).png


Beddeleem
Beddeleem.jpg


Delporte
Delporte.png


Luc Moulin Architecte
- I would like the white behind the Luc Moulin text removed and made transparent, but keep the Architecte text white as it is already.
4e1bb2_5f1c209cf0d04636a414af3fba1b9ec4_mv2.jpg


MASM Cogny - There's a white stroke I did around this logo, make sure to keep it in.
MASM Cogny.png


Stalift
Stalift.png


Tradeco
- I made all text in this logo white, just to let you know in case you can't see it.
Tradeco.png


TRBA - don't get rid of the white background inside the green border.
TRBA.png


Wattiaux
Wattiaux.png


Willy Naessens Group
wngroup-afdelingen-nl-fr.jpg


Those are all the decals I need. Thank you in advance if you manage to get them all done, it's greatly appreciated!
 
Requesting the GM Certified Service text logo:
1296697936797.jpg

I just made the "Certified Service" text decal. Hope this is what you were asking for.

Hello once again! I would like these following decals converted into SVG format.

I have these driver names, in both black & white, with their respective country flags for both left & right sides of the roof pillar.
View attachment 944854
View attachment 944853
View attachment 944856
View attachment 944855

Beddeleem
View attachment 944857

Delporte
View attachment 944858

Luc Moulin Architecte
- I would like the white behind the Luc Moulin text removed and made transparent, but keep the Architecte text white as it is already.
View attachment 944865

MASM Cogny - There's a white stroke I did around this logo, make sure to keep it in.
View attachment 944859

Stalift
View attachment 944860

Tradeco
- I made all text in this logo white, just to let you know in case you can't see it.
View attachment 944861

TRBA - don't get rid of the white background inside the green border.
View attachment 944862

Wattiaux
View attachment 944863

Willy Naessens Group
View attachment 944864

Those are all the decals I need. Thank you in advance if you manage to get them all done, it's greatly appreciated!

Here the first part.
Added one colour variations to some decals
 

Attachments

  • CertifiedService.svg
    4.8 KB · Views: 11
  • Beddeleem.svg
    1.9 KB · Views: 10
  • Delporte.01.svg
    2.3 KB · Views: 10
  • Delporte.02.svg
    2.3 KB · Views: 9
  • LucMoulinArchitecte.svg
    3.8 KB · Views: 9
  • MASM.svg
    3.6 KB · Views: 10
  • Tradeco.black.svg
    6.5 KB · Views: 10
  • Tradeco.white.svg
    6.5 KB · Views: 9
  • WillyNaessens.svg
    17.3 KB · Views: 10
Hello once again! I would like these following decals converted into SVG format.

I have these driver names, in both black & white, with their respective country flags for both left & right sides of the roof pillar.
View attachment 944854
View attachment 944853
View attachment 944856
View attachment 944855

Beddeleem
View attachment 944857

Delporte
View attachment 944858

Luc Moulin Architecte
- I would like the white behind the Luc Moulin text removed and made transparent, but keep the Architecte text white as it is already.
View attachment 944865

MASM Cogny - There's a white stroke I did around this logo, make sure to keep it in.
View attachment 944859

Stalift
View attachment 944860

Tradeco
- I made all text in this logo white, just to let you know in case you can't see it.
View attachment 944861

TRBA - don't get rid of the white background inside the green border.
View attachment 944862

Wattiaux
View attachment 944863

Willy Naessens Group
View attachment 944864

Those are all the decals I need. Thank you in advance if you manage to get them all done, it's greatly appreciated!
To complete @Higny's post
 

Attachments

  • drivers2black 2.svg
    8.2 KB · Views: 11
  • drivers2white 2.svg
    8.2 KB · Views: 9
  • driversblack 2.svg
    8.1 KB · Views: 9
  • driverswhite 2.svg
    8.1 KB · Views: 9
  • attiaux 2.svg
    12 KB · Views: 11
Hello guys, looking for any help with the following logo, I know it might not be ideal but any help its appreciate it. Thx
 

Attachments

  • logoPIG2.png
    logoPIG2.png
    59.9 KB · Views: 10
hi everyone, i was searching someone that posts every decal to make a super gt gt300 replica, every livery is fine, i'm asking this because i noticed that there are many people that post the decals for gt500 cars.
So if you know someone that posts every decal to make a super gt gt300 replica please let me kwow.
Any kind of help is appreciated:cheers:
 
So sorry for making such a difficult request! I don't know how hard these things can be. I just wanted some mini ninjas so I could do a car about the game. Even if it's just the logo and 2-3 of the characters. I'll try to see if I can get them another way. Thanks guys!
 
Hello guys,

I'd need some help with some gradients on the number board attached, just can't make them work properly.

:banghead::banghead::banghead:
 

Attachments

  • 12H Bathurst Number board.svg
    20.9 KB · Views: 12

Latest Posts

Back