GT Sport SVG request thread (Please read 1st post)
- Thread starter daan
- 10,544 comments
- 528,153 views
- 274
- England
- ruzzwald
They were previously uploaded but they got removed from my library for some reason
I don’t know what you need here is a zip of the files or at least a copied link referring to the zip
and a screenshot of what I’m looking for if that’s easier
https://www.gtplanet.net/forum/attachments/grenz-zip.756433/
- 13
- France
- funkstardeluxe01
hi all, I am trying to find the number plate for the COTA 24 hours race of 2018 but no luck so far, not even a good picture to start with...has any of you anything related? thank you.
- 36,525
- Scotland
- GTP_daan
Can't really find any good images of it, but that seems to be what it looks like. Not sure I'll be able to get to it though.
- 13
- France
- funkstardeluxe01
- 6,634
- Columbus, Ohio
- nog3861
Somewhat of an urgent request for you fine graphic artists...can someone please create an svg of the photo below?
Not to sure how difficult this is going to be. Any representation or facsimile thereof would be greatly appreciated
Not to sure how difficult this is going to be. Any representation or facsimile thereof would be greatly appreciated
- 1,196
- Australia
Try this
- 1,196
- Australia
Inkscape is bad for scanning. Tried a half hand trace half freestyle. Here is an attempt at a facsimile thereof.
Edit added a couple extra gradients (not tested) on 2nd zip.
Last edited:
- 6,634
- Columbus, Ohio
- nog3861
@Maninashed thank you for the very qucik turnaround. Very much appreciated my friend.
- 13
- France
- funkstardeluxe01
great, that is exactly what I was looking for, thank you very much! and merry Christmas.
- 33
- Ontario
I'm looking for a user who can work some magic for me on 2 decals. The first is the Niagara Regional Police emblem. Second is the text "POLICE" that is on the side of their latest cars. Images can be located by a Google search or from their Facebook page. Thanks in advance! Message me when you have something to test out. Unfortunately I'm unable to do any work like this as I don't have a computer, and I'm not able to use the GTS upload page on my tablet.
Attachments
- 1,196
- Australia
O.K will have a go. Check you Inbox for progress.
- 17
- Taiwan
- 3,177
- St helens, merseyside, England.
- crazybuttocks198
- Crazybuttocks19
Looking at these 3 to be made negative please. The 'igtl' 'gr2' and the manufacturers logos.
Last edited:
- 1,407
- Coventry
- graveltrap
I know there are plenty of Mclaren P1 GTR logos available in GT sport already, but I am after an SVG file to see if I can curve it to match the splitter / rear wing on the car (see picture), help appreciated!
- 1,196
- Australia
I just traced the photo. Tried in game and it seemed hard get it to keep its shape. Maybe if you find the right projection method you might have more luck than I was having.
- 1,407
- Coventry
- graveltrap
Thanks, I shall give it a go.
My plan was to grab some screen shots of the curves in GTS (top down in the livery editor) and then try and bend the straight SVG to fit them. I have an idea of working with Inkscape, but my tracing skills are poor!
- 2,495
- S.C.
- MMXtreme
If you find the right angle to project, even a straight decal, you can get a good curve out of it. The main thing is, the decal has to be able to be modified, ie, squeezed one way or the other. I've applied straight decals to the nose, and above windshields of cars, and been able to match the curve, with the right projection angle.
- 1,196
- Australia
Try these variations and let us know if you need it another way.
- 3,177
- St helens, merseyside, England.
- crazybuttocks198
- Crazybuttocks19
Thank you just what I wanted.
Hi guys, here are some logos hope someone could help me, thanks for you guys kindly help!
Attachments
- 6,634
- Columbus, Ohio
- nog3861
I know I have asked for a lot from all of you fine graphic artists, and I very much appreciate the work you put into everyone's requests. Thank you so much!
If someone would be so kind as to create an svg of this please, i would be grateful.
If someone would be so kind as to create an svg of this please, i would be grateful.
- 1,196
- Australia
- 1,196
- Australia
Gave you a few options.
Thank you so much mate!!!👍👍👍
- 13
- France
- funkstardeluxe01
View media item 46446
hello people! I would need some help once again...I can now manage to do my own stickers but only if they are plain colors; when it comes to gradients like in this Geely logo, I am useless!!! could anyone give this a go until I find good tutorial. thank you very much.
hello people! I would need some help once again...I can now manage to do my own stickers but only if they are plain colors; when it comes to gradients like in this Geely logo, I am useless!!! could anyone give this a go until I find good tutorial. thank you very much.
- 6,634
- Columbus, Ohio
- nog3861
Wow, amazing, more than I expected! Thank you very much @Maninashed!
- 1,196
- Australia
- 13
- France
- funkstardeluxe01
great it will perfect on my new livery, thank you again.
BTW wich program are you using, I have Illustrator and there is no way I can get that kind of result...
