Turbo's Elantra Sport: The List

Discussion in 'Member's Rides' started by R1600Turbo, Sep 5, 2013.

  1. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    See posts starting at #137 for new car.
     
    Last edited: Apr 3, 2016
  2. Slash

    Slash Premium

    Messages:
    34,817
    Location:
    United States
    :tup:

    Glad you finally got your hands on a new car. Should keep you busy for a while. :D
     
  3. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Thanks. Progress will be slow going but gotta get it on the road first.
     
  4. Slash

    Slash Premium

    Messages:
    34,817
    Location:
    United States
    After the swaps and body work, are you planning on making the car looks new again, or are you going to make your own with other stuff added not offered originally?
     
  5. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    I'll get a full Primera conversion, and a bunch of suspension goodies for track/auto-x use.
     
  6. Leonidae@MFT

    Leonidae@MFT Premium

    Messages:
    5,302
    Location:
    Finland
    Once you get it to a point that it has a manual and you start hooning it, be careful. I once drove Primera GT of this gen and it snapped driver side shaft.. A common problem with Primeras.
     
  7. Cano

    Cano Premium

    Messages:
    20,734
    Location:
    Mexico
    What the hecking heck is it? :lol: sorry, I had never seen one of these before. You only mention a Primera body swap so I gather it's not a Primera. What the hell is it?
     
  8. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    I've owned two B13 Sentra SE-R's, a 200SX SE-R and a 2000 Sentra SE (basically the SE-R for that year) all with basically the same engine. I know my way around them, hence why I was ok with buying this so cheap as I know how to work on them. :tup:

    1995 Infiniti G20.

    Edit: Just to clarify, converting it to a Primera takes nothing more than bumper, grill, badging and taillight swaps. The main difference is that it becomes a Nissan instead of an Infiniti. :)

    [​IMG]
     
    Last edited: Sep 12, 2013
    Intronium likes this.
  9. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Small update. I'm diving head first into a 5-speed swap here shortly, within the next couple weeks. Will update when the car is on the road.
     
    SVX likes this.
  10. UrieHusky

    UrieHusky Premium

    Messages:
    3,445
    Location:
    Australia
    Good luck!
     
  11. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Well I got some of the parts. After spending all day at the salvage yard trying to pull the engine wiring harness we ran out of time, so have to go back next weekend to get the transmission. They are charging me $400 for everything I need, which isn't a bad deal. Then I found a clutch/flywheel set on eBay for $200 shipped that I plan on using. It's an Exedy OEM replacement clutch kit (good) with an SFI certified 11lb chromoly steel flywheel. Shouldn't have an issue with it.

    Getting it together, slowly.
     
  12. eiriksmil

    eiriksmil

    Messages:
    2,096
    I you want euro bumpers hit me up :)
     
  13. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Maybe in the future. Transmission swap right now, then engine tuneup, suspension, then body work.
     
  14. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Parts ordered today:

    - Axles seals
    - Rear main seal
    - Left & Right Axles
    - Clutch cable
    - Exedy clutch kit
    - 11lb steel flywheel

    Just a few more parts to gather from the junk yard and we can get started. :)
     
  15. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    The clutch/flywheel I ordered on friday, got a shipping notice on Saturday night and it arrived today. :dopey: Crazy fast FREE shipping. Not to mention the whole kit was a smokin deal at $217 shipped. Weighed the flywheel on my scale at 10.8 pounds. Next I have to get the cross member, all the mounts and some miscellaneous items and I should be able to start rocking on the install. Unfortunately because the car is currently an auto trans, I have to take the dashboard out to drill a hole in the firewall for the clutch cable, but doing so will make the pedals, ECU & wiring easy to install.

    It'll still be a few weeks before she's on the road as my next check is rent, (perks of making crap money and living on your own) then the next one after that I should be able to get the rest of the parts I need and maybe get her insured & registered. :tup:

    Pics of everything tomorrow. :)
     
    Ronald6, Intronium, SVX and 1 other person like this.
  16. Cano

    Cano Premium

    Messages:
    20,734
    Location:
    Mexico
    pics or nothing has happened and you're driving a Cavalier!
     
    SVX likes this.
  17. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    :nervous: Ewww Cavalier.

    Pics tonight. Or, one crappy pic. :p
     
  18. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Pic!

    DSCN5988.JPG
     
    SVX, Intronium, Doog and 1 other person like this.
  19. Cano

    Cano Premium

    Messages:
    20,734
    Location:
    Mexico
    Ok stuff has happened and you don't drive a Cavalier. Keep posting pics of the swap!
     
  20. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    This weekend I'm going to get the transmission cleaned up and the seals on it replaced. Then hopefully next weekend I'll start pulling the dashboard out and getting the inside of the car finished.
     
  21. Intronium

    Intronium

    Messages:
    221
    Location:
    United States
    In. Should be good in the end
     
  22. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Just ordered polyurethane mounts for the rear and driver side. Then an OEM mount for the right side. Also got polyurethane bushings for the shifter and shifter stabilizer.

    Coming right along. :)
     
    Leonidae@MFT likes this.
  23. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Hit a road block over the weekend. Apparently my car is OBD2 and the ECU and engine harness I got from the scrap yard are OBD1. So I can't use them. This swap has to be done to the T so I can pass emissions here in AZ. Cannot have a check engine light. So, I will be getting an OBD2 ECU from someone on the G20 forums this weekend, then need to source a new wiring harness.

    In a more positive light, got all of the motor mounts pressed in and ready to go. Just need to purchase some final bits (clutch/flywheel bolts, fluids, etc) and we're ready to rock. :)
     
    UrieHusky likes this.
  24. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Got the OBD2 ECU and harness I needed. So, now that my first GT6 racing series is over with I can concentrate on the car starting with this weekend. (minus time for the Bathurst 12hr ;)) Also just sent paypal for clutch and flywheel bolts, so all I have left to purchase is fluid and a battery. Not looking forward to the work, but am looking forward to getting it done. LONG project and not many updates, but that's what happens when you make crap money and only have so much to spend on a monthly basis. :lol:
     
    Ronald6 and Joey D like this.
  25. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Knee deep in the swap now, got the dashboard most of the way out just need a special tool to remove the passenger side airbag. Once it's out I can drill the hole for the clutch cable and get the pedals/wiring installed. Most of the stuff in the engine bay is unhooked, so next step is to get the cross member swapped out to the manual one and I'm still waiting on parts to arrive for that. Once I get those and a few supplies I need (thread lock, electrical tape, etc) then we can finish it off. Hoping to get it done next weekend, fingers crossed.
     
    doodlemonoply and Doog like this.
  26. TheBook

    TheBook Premium

    Messages:
    3,947
    Location:
    United States
    Good to hear it's coming along nicely. Fingers crossed that there aren't any snags. :tup:
     
  27. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Well, been working on it all weekend and didn't get it finished. Guess that's what happens when you are a one man team and have to do everything yourself. Got everything out that needs to come out except for the wiring, that is next on the to-do list. Once I get the new wiring harness cleaned up and re-wrapped, I'll feed it through and then start installing the rest of the parts.

    The only thing I've really had trouble with is drilling the hole in the firewall for the clutch cable. The first hole saw I bought failed almost immediately, then the 2nd one I bought didn't seem to do anything. Upon doing some research I realized that maybe I was using the wrong technique (I guess they work best when you go slowly, opposite of how I was doing it) so we'll have to deal with that next time I go over to work on it, which might be Tuesday.
     
  28. Davis

    Davis

    Messages:
    1,289
    Location:
    United States
    Subscribed because transmission swaps are fascinating. :tup:
     
    Ronald6 likes this.
  29. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Progress! Well, sort of... Ran into all sorts of issues with this, left my last job a few days early just so I could have the extra time to get the car finished before I start my new job Monday and didn't get it done. So have to borrow my dad's gas guzzler V8 Dakota truck for a week. I ended up having to pull out the wiring harness I had originally bought because it was missing connectors, and went to the scrap yard today to get another one and was unable to get it out of the car before they closed so they kicked us out. I did get the car insured and registered though, so hopefully I can get it finished next weekend.

    Here are a few photos I snapped while working on it.

    10lb lightweight steel flywheel installed. (forgot to take photo of clutch installed)
    [​IMG]
    DSCN6428 by JaMillPhoto, on Flickr

    Front transmission mount.
    [​IMG]
    DSCN6434 by JaMillPhoto, on Flickr

    Transmission installed.
    [​IMG]
    DSCN6433 by JaMillPhoto, on Flickr

    3 pedals! Yay!
    [​IMG]
    DSCN6432 by JaMillPhoto, on Flickr

    What remains of the interior mess after I put the dashboard back in.
    [​IMG]
    DSCN6431 by JaMillPhoto, on Flickr

    The work area.
    [​IMG]
    DSCN6427 by JaMillPhoto, on Flickr
     
    Ronald6, CarBastard, SVX and 2 others like this.
  30. R1600Turbo

    R1600Turbo Premium

    Messages:
    49,773
    Location:
    United States
    Small update. Had issues with missing connectors on the last wiring harness I got, so had to get another one. Tried to take it out of a car at the scrap yard last weekend and was not successful by the time they closed, so they kicked us out. Thankfully it was still there this morning when I went back to get it. Got that all installed in the car, put all the air intake stuff back in and got the rest of the engine bay stuff buttoned up.

    The passenger side CV axle I bought ended up being the wrong one, it was too long. (might have been for an LSD equipped car, mine is not) Found another one in town and it went in like butter, so I put everything back together on the passenger side and underneath. Hoping to get the car running by Sunday night, here's what's left:

    - Install shift levers & shifter
    - Drivers side brake caliper replacement (old one had a leaky piston seal)
    - Tighten everything up on drivers side
    - Bleed the brakes
    - Button up wiring under the dashboard
    - Put transmission fluid in
    - Install new battery
    - Cross fingers and start her up. :)