Am I missing something?

  • Thread starter Thread starter MerL3
  • 12 comments
  • 2,060 views
MerL3

MerL3

Messages
15
United States
Baton Rouge, LA
Messages
TreCrawf
I see posts on here with people saying they've used a Furai, McClaren GT1, Zonda Race Car, & a Ford GT LM to compete in 650pp seasonals. I have all these cars & detuning them still leave me over 650pp. So my question is, how is this possible? Am I missing something here?
 
You sure you've detuned them completely? If you have a non-removable part, tough luck!

Try using the engine limiter if you haven't already.
 
The Mclaren only needs a slight detune of the engine to get under 650pp. The Zonda's not that far off as it comes, again I merely detune the engine on the limiter. One of my Ford GT LM Spec 2 wasn't over to start with so I changed the oil and ran it with no other changes, so It's not at maximum downforce. .
 
If you've done the engine stage 1, 2 or 3 mods, or the weight reduction mods, you can't undo them, so you usually can't get down to the desired PP.
 
Add weight, reduce downforce, remove add-ons (turbos, exhaust, intake, ECU, etc.), and if that doesn't get you there, use the power limiter to cut power.

I'll generally cut power before I'll add weight. I prefer a lightweight car with less power to an overpowered water buffalo.
 
1241Penguin
You sure you've detuned them completely? If you have a non-removable part, tough luck!

Try using the engine limiter if you haven't already.
Click to expand...

THIS. Thats exactly what I was missing. Thanks.
 
I know I'm super late, but thank you to everyone for your positive feedback.
 
MerL3
I see posts on here with people saying they've used a Furai, McClaren GT1, Zonda Race Car, & a Ford GT LM to compete in 650pp seasonals. I have all these cars & detuning them still leave me over 650pp. So my question is, how is this possible? Am I missing something here?
Click to expand...

detune them,
increase the wieght and position,
and decrease the power percentage :)
 
I just bought an f10 for latest event, how the hell do I reduce it to 750 pp, It must be able to be done because there are f10,s being used , you can see that if you look at the online rankings, thanks ladies and gents for your replys.
 
Tomazagato
I just bought an f10 for latest event, how the hell do I reduce it to 750 pp, It must be able to be done because there are f10,s being used , you can see that if you look at the online rankings, thanks ladies and gents for your replys.
Click to expand...

Add ballast in the body section then detune using the engine limiter
 
You must log in or register to reply here.

Latest Posts

Back