G27 Homemade wheel stand

  • Thread starter Thread starter VelineonVXL
  • 20 comments
  • 9,658 views
VelineonVXL

VelineonVXL

Messages
207
Venezuela
Venezuela
Messages
RSM-Velineon - VelineonVXL
Design: it is not my design, but I copy this
dfgtwheelstand.jpg

Result:
img00773201202261803.jpg

img00769201202261802.jpg

img00770201202261802.jpg

img00767201202251809.jpg

My Handbrake™®:lol: I'm a drifting fan:tup:
img00768201202261123.jpg

img00771201202261803.jpg

The DFGT dead and i change it for a G27:dopey:
img00142201207202333.jpg

img00146201207211720.jpg

Sorry for bad pics. Phone camera :grumpy:
 
Last edited:
I'm asumming that pipe next to the DS3 is a controller. It looks functional and cheap.
 
Have there been any serious wobbling with this wheel stand so far? I'm seriously considering doing this but with a bit of my own modifications of course.

I really like the simple design. 👍
 
Last edited:
Same here ,might just add some stuff to reverse the Pedals.How much does the wood cost?
 
sems4arsenal
Same here ,might just add some stuff to reverse the Pedals.How much does the wood cost?
Click to expand...

I'm also going to be reverse mounting my pedals, I just hope it'll be sturdy enough. :)

Any suggestions to what else to get to make the wheelstand sturdy as possible besides wood?
 
VileFCboy
Such a great idea 👎
Thanks dude!

I forgot I had so much of these lying around in my garage.
Click to expand...

If you are going to build a similar thing ,I am gonna ask you to take step by step pictures,yes i'm gonna use you :sly: :D
 
sems4arsenal
If you are going to build a similar thing ,I am gonna ask you to take step by step pictures,yes i'm gonna use you :sly: :D
Click to expand...

Awww dang it, I just finished my wheelstand. I never thought of doing step by steps since I'm in no means a professional. lol

I didn't reverse mount my pedals since my wheelstand was way too heavy already for what I want it to be
because now my "wheelstand" seems more like of a rig. Just without a seat. :crazy:
I'll take pictures tomorrow.
 
VileFCboy
Awww dang it, I just finished my wheelstand. I never thought of doing step by steps since I'm in no means a professional. lol

I didn't reverse mount my pedals since my wheelstand was way too heavy already for what I want it to be
because now my "wheelstand" seems more like of a rig. Just without a seat. :crazy:
I'll take pictures tomorrow.
Click to expand...

Okee can You send me a visitor message when you upload them :cheers'
 
Here's mine based on the one velineon did but with changes.
Sorry for crappy phone pictures.

169j95w.jpg

t9a24w.jpg

169j95w.jpg


Sure it's heavy to the point where I can almost consider that it's a rig. But I can still lift it and put it in my closet atleast. :)
 
It has some slight wobbling but I dont notice it at all when I'm playing and around $10 for three 5 feet of 2x4 wood at my local home depot. :)
 
I have a DFGT ( Lol old i no :) ) I seen the pics for the hand brake mod with the controller can someone please tell me how this work and how can i do it please i really need a handbrake Thanks
 
E-brake mod is ok but mine is 10x more simple easier to make & works better as I map the E-brake to R3 on Ds3 so E-brake is gradual & on an axis not just on/off like when you use a button. Go to my GTp album named "my G27 rig" for pics. No need for a "how to" write up as you can clearly see how its done also I have reverse mounted my pedals with them still in the casing. Any questions just pm me here on GTp.
 

Similar threads

H
VNM V1 Pedals and NLR Wheel Stand 2.0
Replies
1
Views
2K
Loekvos
L
xXBigBoost88
Marada Wheel Stand Seat
Replies
1
Views
3K
eSZee
eSZee
loren2079
logitech g923 wheel pedal and stand
Replies
0
Views
1K
loren2079
loren2079
The_Antman_
Logitec G Pro Wheel Issue (anyone familiar)
Replies
5
Views
3K
The_Antman_
The_Antman_
M
foldable wheel stand/cockpit recommendations
Replies
1
Views
1K
John G
John G

Latest Posts

Back