a little help on drifting?

[BMW740i]

can some one tell me how to drift?
ive got my 1006 R34 Vspec Skyline with all the mods (was 1079 but its just went down for some reason) and i just cant seem to drift(i dont know how to drift for a start so a little help needed) ive got these settings on it

Springs 17/17
Ride Height 95/95
bound 6/8
Camber 1.0/0.0
Stableizers 3/5
brakes 7/10
Initial 5/60
Accel 5/60
Decell 60/5
Downforce 29/35
ASM 8
TCS 3
VCD 20%

 

[bustwave.]

take off asm and tcs. and waht tires do you have on it?

 

[[myg0t]wicked]

oil change

 

[BMW740i]

ive tried oil change still BHP wont go up
ive got Medium Soft tyres on it

 

[MrTokyoJoe]

try a FR car. or VCD 10%, lower the HP to 400-500, and brakes 24/2

 

[bustwave.]

for my AWD cars. i put hard slicks in fonrt and sim in back. you slip easier. acts like sim tires VCD 10%

 

[Night_Drifter]

Springs 15/12
Ride Height 0/50
bound 4/2 or try 2/4
Camber 0.0/0.0
Stableizers 4/3 or 3/4
brakes 19/9
Initial 40/50
Accel 50/50
Decell 50/50
Downforce (i dont know!!!!)
ASM 2
TCS 1
VCD (dont buy it or make it to the lowest you can)

thats how i drift my Skyline, plus your HP went down because your mileage is too high, its like in real life cars, your car is over mile, so the HP went down, or you may need to change the oil everytime you race a long lap race or a championship race!!!

 

[halfracedrift]

Nightdrifter, waht do you mean by ride height 0/50....
you can't make ride height 0..

 

[Night_Drifter]

we''ll like put it all the way down, you know, for me, i put it all the way down by tabbing the L1 on both hights, then i use the back with L1 by tabbing onces, the front should be lower then the back!!!

 

[nice shirt]

1006hp?! ur nuts! try a rx7 with about 50hp over stock with sim tires.

 

[MrTokyoJoe]

listen to nice shirt...