Any suggestions to improve my cheap custom wheel mount?

  • Thread starter Thread starter MrOldboy
  • 7 comments
  • 1,879 views
Messages
5
Ok well I got into GT5 recently and wanted a wheel. Never owned one before but felt it would add a lot to the game and other pc/ps3 games too. So I did a lot of research and settled on getting a used wheel, preferably locally off craigslist.

So I wanted a DFP originally but all the ones in my area were already sold since GT5 just came out I assume. But I found someone selling a logitech red momo for $20, thinking it was broken I asked him to test it out first. It had been in his garage for a few years apparently. Well he plugged it into his ps3 and it turned on and it seemed like the ps3 recognized it. I already knew it worked with GT5 after some users posted it did on another forum. So I got it and it works almost perfectly, it centers a few degrees to the left for some reason.

Anyways I needed a place to mount it right, use your desk. But I have a lazy boy type of chair and have nothing in front of me. I used a tv tray fora day but it was so light that if I didn't tough the wheel the FF would move it on its own. So I googled some designs and found one I liked from a user, changed it a bit to fit my specific needs/wheel/pedal. And it came out pretty good I think. Here's what mine looks like. I also glued on some hooks I had in my garage to help manage the cords.






The main issue is it is still not quite heavy enough, during turns if I don't pay attention I can lift on side a cm or so off the ground which is annoying.

I was thinking of adding weight to it. Maybe putting a pole in the base and sticking a weight on it. Maybe 5 lbs or so. Or adding a weight to the underside of the top table to add weight. Any suggestions on how to accomplish adding weight to the rig?

Also does anyone know of something I can buy a hardware store that you put under furniture to add grip/friction, like some kind of rubber? The ones I have are just made to protect the floor not grip it.
 
IMAG0159.jpg

it works, had to add a like 5 screws though...
 
The main issue is it is still not quite heavy enough, during turns if I don't pay attention I can lift on side a cm or so off the ground which is annoying.

Perhaps adding a couple of pieces of wood to the outside would help prevent the table from tilting to the left and right. Below is a quick mock-up of what I have in mind.

Fa3pn.jpg
 
Yes, add couple of pieces to the outside diagonally from corner to corner. Makes the structure a lot more rigid.
 
yeah I though of adding some to the side like a few that others made, but it would start to get a bit wide for my room. that might be the best solution though thanks.
 
Could you add triangle type pieces to the legs, but attach them with door hinges so they can fold in and out for easy storage. Then find a clever way to lock them into place and you are set. Hope that makes sense.

*Edit*

To do what I am thinking, you are going to need to have the vertical pieces on the outside portion of the stand. The triangle shape won't really fold in and out over the outter horizontal pieces.
 
hi guys new to forum and thought i would post a pic of my rig, got my first wheel the other day and after a couple of hours trying to comfortable with it on the table i got frustrated with all the sliding around so i decided to re-design the coffee table
100_1575.jpg

on topic you could try putting something on top of the parts you have going under the chair to fill the gap so there is no room for the rig to lift
 
Last edited:
Moved to the wheel section.
 
Back