cockpit genesis

[alfp]

Hi all, I want to show a new cockpit, you can help many who have trouble placing accessories.
is fully adjustable, and can be placed absolutely everything, I think is very interesting.
Also if you want something special done, what else can you ask for?.

I hope you like it, thanks.
http://www.totalspanishsimulator.com/

 

[iNs3CuRe]

That is very neat, I like it 👍

 

[ultimate]

wow, looks so pretty, amazing price aswell

 

[CTstryk]

Nice looks very solid, love the construction...

 

[Masi_23]

Looks neat. Great job 👍

How much was total cost?

 

[Hwangm]

I think It look fantastic. but that steering wheel should't face the waist area, it should be much higher than that to "simulate" real race car.
This is what I mean ... Eye level

 

[JLBowler]

Height of the steering wheel comes down to driver preference. You could look at 100 different real life race cars and find 100 different steering wheel positions. It all comes down to what makes the driver most comfortable.

To the OP, very nice rig.

 

[GTP_Gearhead]

Nice rig, is the keyboard on a swivel? If not, I'm thinking it's pretty far away unless you have four foot arms.

 

[alfp]

Hello again, I'm glad you like my design, I try to be compatible with all the accessories and the positioning of them, prices are on the web.
to give prices for each person, send the data on the web with the zip code too.
This cockpit although aluminum, weighs a lot, because it is very sturdy.
single cockpit weight is 18kg . and with the support 3 monitors is 37kg.
as you see is heavy, but it must be so, for that next year there will be a 3-axis motion I'm designing.
Genesis cockpit is made ​​almost entirely with 45mm profile.
other designs on internet and forums are made with 30mm profile, the difference is more than twice the weight, and well over twice as strong.
keyboard support can be turned into the cockpit, and also to put himself on the inclination you want, you can put whatever we want, more open, more closed, more inclined, less inclined, Higher Lower, you decide .

I've also designed a footrest for the clutch pedal, that allows to put in any position we need.

if you need a special bracket and not on the web, you can send a small plane with data the way you want to place the accessory, and where.
excuse my spelling mistakes possible, use a translator, thanks.

 

[alfp]

Hello again, I bring another modification requested by a client, it comes to folding the cockpit, so you can slide to reduce the length, no tools needed.

I will also make a sliding tray for the keyboard, anger beneath the steering wheel, height is 4 cm out of the way, I hope you like it.

 

[alfp]

I have almost finished good of all the new variation of the cockpit, this time it is foldable, and as in that of the grid there is nothing absolute or definitive, but I put this way also I have another folding system, but I put some pictures and you judge yourself.

so you see it extended and folded, ranging from 140 cm to 104, even though as I discuss can be folded over, what if not all Baquet, would pass between the pillars, if yes would come to touch the pedal, no longer obiamente be folded over, I'm finishing several more things, one is a base for the keyboard sliding under the steering wheel, and other design I'm doing is for another client, who wants to reconcile with flight simulator, when I have finished I will put it, I hope you like it, greetings.
http://www.totalspanishsimulator.com/wp/

 

[alfp]

I have good and supports keyboard under the steering wheel, the maximum width is 472mm keyboard, the height to the bottom bracket is 60mm wheel, does not interfere when folded for driving on the wheel and it got stuck at the wheel legs should not bother your knees, this system comes in handy, especially for those who also utlizan other games (strategy, aviation and action, and those who want to remove the PC board), I hope you like it.
I'm also involved with a commission to adapt to flight controls and is compatible with self, I'm also collecting data for the F1 cockpit, the only thing this type of cockpit is more exclusive position, limiting use only to F1.

 

[Devedander]

Price seems pretty reasonable...

 

[ravey1981]

These cockpits look great! I don't have room for a permanent setup at the moment but I know I'll be having one of these when I do! Very well thought out and adjustability is second to none.

 

[alfp]

Hello again, I'm designing a system of supports for aviation controls, such support can be adjusted up to 35cm, also can be moved by the side profile.
to enter and exit easily be removed lateral support loosening the black plastic knobs, it goes up, I hope you like it.

I made other minor modifications, I added support for iPad or Tablet to one of the supports of the flight controls, I hope you like it, greetings.

 

[alfp]

another good accessory, Ipad or tablet holder, you can focus as you want, and slide up or down the lane.

I hope you enjoy it.

 

[SGETI]

this is a great looking rig, has it all. Just added this site to the master list.

https://www.gtplanet.net/forum/showthread.php?t=239878

 

[alfp]

Hello again, today I will teach other extras that I have developed, which are used to auto and flight and I also teach a new cockpit design specific for F1.
I've also made ​​a stand for monitors in other cockpits, like everything I do, have multiple regulations, height, separcion monitors and the angle between them.

the standard model, supports 3 monitors from 21 "to 27", with anchors vesa 75-100-200, or central one to 47 ".

Here a sample monitors 27 ".
We are also developing a system controller based on X-Sim, which will allow to use different components and adjust them to your liking, pedals, buttons, and servo motors for motorized wheel and other extras.
and finally we also have our curved screen, which allows total immersion in the game, with a vision of 170 degrees, with a standard height of 450mm, and 1250mm wide, there are more models.
we are finishing the holders projectors with reflection system for optical mirrors, which reduces the projection distance, only 550mm of the screen.

This system allows for a smaller space and using LED projectors, with no delay in image 0.2 ml / sec.
Well this has been a quick trip for some of my creations, I hope you like it, greetings.
http://www.totalspanishsimulator.com/

 

[alfp]

and now the latest development is the Genesis F1 cockpit is a cockpit developed specifically for fans of F1, not suitable for other uses, like his brother the standard Genesis is fully configurable, seat, monitors, pedals, steering wheel , controls, etc. ..

the cockpit we offer will have their complement of motion system for next year, for F1 will be a 4 actuators with 200mm of travel, and a speed of 400mm/seg.

and for the standard model, will be a 3-axis, which may increase to 5 axes, with 300mm travel routes, and speeds 400mm/seg.
We are also developing a system controller based on X-Sim, which will allow to use different components and adjust them to your liking, pedals, buttons, and servo motors for motorized wheel and other extras.
Well this has been a quick trip for some of my creations, I hope you like it, greetings.
http://www.totalspanishsimulator.com/

 

[alfp]

Hi, I put some pictures of a client with aero supports both supplements plane and car, hope you like it, greetings.

 

[alfp]

Well, another little something more, as many had asked me to seat brackets, because I designed some supports in aluminum 6mm thick and 100mm high with widths from 350 to 450mm, with that comes all that I know, it may also add extras anchored to the supports, for example handbrake, change shirts etc. .., and not want to put the extras and want something very affordable 4 soportees individual, everyone can adjust the angle of the seat, I hope you like it, a greeting.

 

[Mayaman]

Height of the steering wheel comes down to driver preference. You could look at 100 different real life race cars and find 100 different steering wheel positions. It all comes down to what makes the driver most comfortable.

To the OP, very nice rig.

I'll disagree for the most part. Most of the race cars I've driven or seen in real life have the wheel pretty far up. You sacrifice control when the wheel is that low. Like Marcus posted, there are literally hundreds if not thousands of pictures online with the wheel in the correct position. Also, of all the sports cars I've driven and owned the "correct" wheel position is usually higher than that.

As far as driver preference for a home rig, I guess thats true, but if realism is your goal, then you should move the wheel up.

 

[wajdi1977]

I'll disagree for the most part. Most of the race cars I've driven or seen in real life have the wheel pretty far up. You sacrifice control when the wheel is that low. Like Marcus posted, there are literally hundreds if not thousands of pictures online with the wheel in the correct position. Also, of all the sports cars I've driven and owned the "correct" wheel position is usually higher than that.

As far as driver preference for a home rig, I guess thats true, but if realism is your goal, then you should move the wheel up.

👍👍

The driver has the steering wheel at the same hight of the shoulders (a bit lower)!I'm a GT-cars fan and I drive only GT cars in rFactor 2! I have made a lot of research about GT cars cockpits !when I drive in my cockpit I have G27 steering wheel almost up to the shoulder hight)!