DFGT / Desk Problem

[Niss]

Hello Guys, i have a DFGT and mainly use it for a PS3 but i will get a brand-new PC this week or the next one but just found out that i can't confirm my DFGT onto the Desk it's just painful because it's just 0,2-0,3mm difference, in other words i need Help! Feel free too get your thoughts in here guys!

 

[Brock1Samson9]

Just had a look at my old DFP (mostly identical to your DFGT) and it has about a 3/4" extender sticking up (back towards the wheel) from the clamp. You should be able to pry these off and clamp your wheel down just fine. If for some reason you don't have have these clamps you could try cutting slots into your desk for the clamps or if you'd rather not cut up the furniture you could attempt to modify the length of the clamps which may prove more difficult.

 

[itrdc5]

Are you saying the desk is too thin for the clamps? Easy fix. Just put a block of wood or something underneath the desk and then clamp the wheel to both the desk and block.

Edit: Just re-read this. Sorry, if you meant not wide enough to fit your desk, then I've attached image illustrating what Brock1Samson9 means. Photo is G25 wheel but the clamp is similar on the DFGT.

.
I'd imagine that would be enough unless you have a super thick desk. Anyway, good luck.