DFGT E-Brake Help

  • Thread starter Thread starter xDriftzzinc
  • 5 comments
  • 1,570 views
xDriftzzinc

xDriftzzinc

(Banned)
Messages
1,120
United States
United States
Messages
DriFtZz
Ok so i have a DFGT and i am currently using my stick as an e-brake. When i pull the stick down it works as an e-brake but i would like a more effective method. Does anyone know a way to make a cool yet cheap e-brake? I would love to use cheap things i can find around the house.
 
I use just the thing
Get a plank 250mm long 100mm wide and stick/attach to the dfgt. Then get a ds3 and a board marker, pull the end off it and it fits right over it, then glue it in place. Then glue the ds3 to the plank. Then add something to make the force stronger. I got some hair bands and overlapped them around under the ds3 and up to the clamp handle, and its a beauty.
So then you have the handbreak right next to the gearstick.
I wouldnt use the sequential for drifting as its awkward to use the paddles mid-drift.
 
It sounds like it is but its not. I just made it sound complicated.
let me try again.
So the mesurements are in mm 'milimeters'

*Get a piece of wood that is 250mm long and 100mm wide.
*Have superglue.
*Get a ds3 and a board marker. The ones with the larger ends. *Pull the end off with a pliers (<spelling) and take the ink thing out.
*Put the end over the analogue and glue it in place.
*Then glue the ds3 to the end of the piece of wood.
(I didnt glue the wood to anything, as i have a wheelstand pro and put it under the dfgt clamp, but if you dont have anything like that i recommend gluing/securing it to something.)

I might be able to post a video or something of it on youtube, 'couse my images will not upload on any site. If you need any help, just let me know. I would be more than happy to help. :)

Its actually very simple, and took me 10 minutes or less.
 
Take your DS3 gamepad and tape on your desk with double sided tape.
Set the e brake on the left joystick and the DS3 to player1. When you pull the joystick you have your e brake ;)
that's the way i do it.
 
monsterGAUZ
Take your DS3 gamepad and tape on your desk with double sided tape.
Set the e brake on the left joystick and the DS3 to player1. When you pull the joystick you have your e brake ;)
that's the way i do it.
Click to expand...

Thats really what i did but i hard-mounted it and put a handle on the analogue
 

Latest Posts

Back