Fanatec Firmware

  • Thread starter Thread starter GTP_FastM3
  • 6 comments
  • 1,093 views
GTP_FastM3

GTP_FastM3

Premium
Messages
660
Canada
Prince Albert/S
Messages
GTP_FastM3
How can I tell what firmware version is on my wheel?

I just bought a new GT3RS in November and I'm not sure what firmware version it has. It is missing a couple of adjustments so I'm guessing it isn't the most current, but I'm wondering if I can find out what version it does have.
 
I am not sure if it is the same on the GTRS3, but on the PWTS you hit all 4 of the bottom buttons when the wheel is in standby mode.

Though...

Does the GTRS3 even have a standby mode?


.
 
It would be much more helpful if we had images. I have the same problem as the OP and I can't figure out how to do it.
 
nick09
It would be much more helpful if we had images. I have the same problem as the OP and I can't figure out how to do it.
Click to expand...

I don't have a picture, and I see how my vague 4 lower buttons could be confusing.


When looking at the wheel, you have four main silver buttons on the left side, four on the right, and then you have the d-pad and 2 more buttons all the way at the bottom.

You want to press the bottom 2 from the group of 4 on the left side of the wheel, and at the same time press the bottom 2 from the group of 4 on the right side of the wheel.




.
 
You need to switch the wheel on, when it does its start up rotation, catch it before it returns to center and hold the 4 bottom buttons as described above, manually move it to the center and it will display the firmware, and turn off or switch on the fan (depending on your firmware version.)
 

Latest Posts

Back