Fanatec handbrake orientation ?

[WeamDreaver]

Can anyone tell me in what direction the handbrake works in this configuration, placing it at the top of table?
Pull would be the desirable way of course.

 

[PzR Slim]

In your diagram it's push. But if you spin it by 180 degrees ( how it should be mounted) it becomes pull 💡

 

[WeamDreaver]

I was afraid so.

I can only mount it on the table right next to the wheel. But by mounting it in the opposite direction, the lever would be too far away to reach.

 

[PzR Slim]

I was afraid so.

I can only mount it on the table right next to the wheel. But by mounting it in the opposite direction, the lever would be too far away to reach.

There is an option to mount it vertically as I've done on my rig

I've no idea if this would help your situation or not but thought I'd mention it.

Or you could mount the handbrake on a piece of wood and then attach the piece of wood to the table in such a way that the handbrake was in reach?

 

[F Inferno]

They now have a table clamp which lets you adjust the height and mount it vertically as PzR has which would position it the same as your pull option.

https://www.fanatec.com/us-en/wheel...net&utm_campaign=General+Links&a_aid=gtplanet

Attaches to the shifter table clamp.

 

[Dopplegagger]

I thought you could disassemble the unit and turn the handle around? If so, you can mount it in a push configuration.