Fanatec Standard Pedals not working (HELP)

  • Thread starter Thread starter tuga703
  • 2 comments
  • 3,626 views
tuga703

tuga703

Messages
383
United Kingdom
Newcastle
Messages
Tuga703
Messages
I'm sorry?
My standard pedals are not working, i have Turned the wheel off and back on,I have turned the ps3 off and back on and I have unplugged the pedals but when I try to race the pedals do not react In any way unless I unplug the pedals and plug them again where it bleeps the throttle at full power and bleeps the brakes at half power. There appears to not be any loose parts inside the case. Any ideas ?
 
Hmm I wonder.

I have had problems using my g27 pedals with my wheel, basically yours and my pedals are potentiometer based.

Originally I was using CSP until they developed a fault.

I hooked up my G27's using the supplied adapter but had no luck.

Fanatec sent me a replacement adapter and I still had a problem.

What game are you trying ? Does the game have a telemetry screen?

If so call up the telemetry screen and try feathering the gas and brake alternately.
Try holding the brake around 50% and feather the throttle around 75%.

See if telemetry shows cross talk (brake,clutch and throttle spiking randomly)

If you haven't telemetry you will have to go by brake lights(exterior cam) and throttle noise.

If you are having this issue then it's a pain because you can get it to work after maybe 20 minutes of feathering. Or sometimes it can start up straight away on another day.

If you get it working it will work fine continuously until you power off.

Be very interested to hear your results.
 
I have found the problem. Basically the ps/2 socket on the pedals has bad contact so I am having to insert the wire in and then lean it to the left. Thanks Anyway
 

Latest Posts

Back