Ferrari 410 SuperAmerica Ghia Coupe 1956

  • Thread starter StarLight

StarLight Garage presents 25th Ferrari ... definitely addicted to Ferrari, please don't blame but Ferrari for making such cars.
And after my visit to Maranello itself I always be connect to Ferrari.

Anyway here is the one-off Ferrari 410 SuperAmerica Ghia Coupe from 1956.


While Ferrari was busy building and racing cars in the 1950s, the factory found time to build luxury cars that were truly in a class of their own. This by no means was a series production; on average only one of these was constructed each month.

The first of these was the 342 America, first shown in 1952, fitted with a Touring styled body. The long block engine was derived from the 340 America sports racer, but the chassis was a bit longer to increase the interior space. Only six examples were produced, of which the Pinin Farina bodied examples are the most important. They were the first Ferraris bodied by the Turin based coach builder and started a strong collaboration that continues to this day.

At the 1953 Paris Motorshow, two new road cars were displayed, both using Lampredi's 'long block' V12 engine. The smaller of the two was the 250 Europa and its big brother the 375 America. It shared its 4.5 litre engine with the marque's Formula 1 and sports car racers. This extremely powerful engine made the America the fastest luxury car in the world. With production of the chassis already limited, the coach builders made sure that every one received a custom body. About ten were built during its two production years, with Pininfarina bodying the majority of them.

Two years after the 375 America's production, Ferrari again showcased a new luxury GT at the Paris show, but in chassis form only. Dubbed 410 SuperAmerica, the completed car made its debut at the Brussels Motorshow a year later. The Pininfarina designed body resembled the 250 GT competition car. Compared to the smaller Ferrari, the 410 Super America's 2800 mm long wheelbase was 200mm longer. Power came from Ferrari's largest engine to date, displacing just under 5 litres. It shared this engine with the 410 Sport, designed specifically for a number of South American road races. In competition form, the engine was good for at least 400 bhp and the 340-360 bhp available in the SuperAmerica was more than sufficient.

Three series of Super Americas were created. In 1955 the first batch of 16 cars were produced and mainly bodied as a coupe by Pininfarina. The last examples constructed shared the 2600mm wheelbase with the 250 GT racing cars. In 1956 and 1957 only five were assembled and by that time were the only Ferraris still using the Lampredi long block engine. In 1958 a new Pinin Farina body became available, which was fitted on another twelve cars. Using one of the shorter wheelbase chassis, Ferrari and Pininfarina constructed the stunning 410 Superfast, which was displayed at the 1956 Paris show.

Production of the Lampredi engine finally ceased in 1959, so a new engine was needed for the 410's replacement. First shown in Brussels in 1960, the 400 SuperAmerica, featured a four litre version of Colombo's 'short block' V12 engine. It was the upscaled version of the three litre V12 unit that had scored so many successes in Sports Car and GT races. Four years later, a final incarnation of the limited production luxury GT was introduced in the shape of the 500 Superfast. It used a five litre version of the short block V12. In 1966 the model was discontinued after fifteen years and just 130 cars produced. Today the America, SuperAmerica and Superfast remain as some of the most exclusive cars ever produced by Ferrari.

Country of origin: Italy
Produced in: 1956
Numbers built: one-off
Designed by: Giovanni Savonuzzi for Ghia

Configuration: 60º V12
Location: Front, longitudinally mounted
Construction: Light alloy block and head
Displacement: 4,962 cc / 302.8 cu in
Bore / Stroke: 88.0 mm (3.5 in) / 68.0 mm (2.7 in)
Compression: 8.5:1
Valvetrain: 2 valves / cylinder, SOHC
Fuel feed: 3 Weber 46 DCF/3 Carburettors
Aspiration: Naturally Aspirated
Power: 340 bhp / 254 KW @ 6,000 rpm
BHP/Liter: 69 bhp / liter

Chassis: Body on elliptical-section steel tube chassis
Front suspension: Double wishbones, transverse lower leaf spring
Rear suspension: Live axle, longitudinal semi-elliptic leaf springs
Steering: Worm and wheel
Brakes: Drums, all-round
Gearbox: 4 speed Manual
Drive: Rear wheel drive

Weight: 1.200 kilo / 2,646 lbs
Wheelbase: 2,800 mm (110.2 in)
Track front: 1.455 mm (57.3 in)
Track rear: 1.450 mm (57.1 in)

Top Speed: 260 km/h (162 mph)
Power to weight: 0.28 bhp / kg