G27 Help

[JDM_ACCORDK24]

Hey GTP! I just got my G27 in mail today and for some reason I can't get it working on GT6 nor my ps3. There's a blinking green light on the clutch and it just keeps on blinking. I tried turning it off then pluging it in while ps3 off and it still doesn't work. Any help? Thanks. (Sorry if there's another post like this one I'm too lazy to look )

 

[CBH]

Hey GTP! I just got my G27 in mail today and for some reason I can't get it working on GT6 nor my ps3. There's a blinking green light on the clutch and it just keeps on blinking. I tried turning it off then pluging it in while ps3 off and it still doesn't work. Any help? Thanks. (Sorry if there's another post like this one I'm too lazy to look )

This should be place here Sim Racing Hardware.The shifter and pedals are powered through the USB to the PS3 and if it is a blinking green light that means it may not be connected properly check connections ?. But the green light does goes on/off for a few seconds when you turn on your PS3.

 

[subsist]

Make sure everything is plugged in right, usb, power cables etc, have the wheel plugged into usb slot 1 on the ps3, when you boot the ps3 you should get a solid green light on the gear stick/button box and the wheel should calibrate from left to right.

If you have a flashing green light on the stick then something is wrong, if you have everything plugged in right and are still getting it, try it on a pc, if it happens on the PC then you most likely have a lemon and will need to get a replacement. Good luck.

 

[acjy1985]

I had something similar happen to mine not long after I had got it. It started up then partly calibrated and then just stopped and the little light blinked (it is on the gear lever rather than the clutch). I contacted Logitech support and explained to them exactly what was happening and after some help from them they decided it was terminal and advised me to get a replacement. I took it back to the shop for a refund and got a new one which has worked fine.

 

[JDM_ACCORDK24]

Make sure everything is plugged in right, usb, power cables etc, have the wheel plugged into usb slot 1 on the ps3, when you boot the ps3 you should get a solid green light on the gear stick/button box and the wheel should calibrate from left to right.

If you have a flashing green light on the stick then something is wrong, if you have everything plugged in right and are still getting it, try it on a pc, if it happens on the PC then you most likely have a lemon and will need to get a replacement. Good luck.

I had something similar happen to mine not long after I had got it. It started up then partly calibrated and then just stopped and the little light blinked (it is on the gear lever rather than the clutch). I contacted Logitech support and explained to them exactly what was happening and after some help from them they decided it was terminal and advised me to get a replacement. I took it back to the shop for a refund and got a new one which has worked fine.

Thanks guys for the help! Mine had to be bad cause i plugged it into PC and downloaded the Logitech profiler/gaming software and it wasn't finding the wheel. It's surprising how mine was brand new too and it still had problems

 

[Johnnypenso]

Thanks guys for the help! Mine had to be bad cause i plugged it into PC and downloaded the Logitech profiler/gaming software and it wasn't finding the wheel. It's surprising how mine was brand new too and it still had problems

Maybe you got the one that @acjy1985 sent back

 

[nosoks]

it took my pc about 6 tries and the same number of "replugs" before it found it,