gt3 drifting r-32 skyline settings

ok you guys i know this is gt4 but the gt3 forums are never active, but i just started drifting in gt3 coming from tokyo extreme racer zero
but i am having some problems when i drift my car i get good angle its just i keep going forward and keep kissing the wall, i like half way around the corner then i just go forward while still slinding and hit the wall, or i won't go all the way around the corner and exit i will just keep going sideways into the dirt and and end up spooning the wall, i also use the ebrake to get my drift started, i have tried the feint but when i do it i don't lose traction, and when i try to do the brake drift it just slows me down and i don't loose tractions. and when i try the lift off it looses very little traction.

do you think its my settings or do i just need more practice
here is my settings

Skyline Gt-R Vspect II R32

spring rate: 9.6/8.0
ride heights 9.6/9.6
shock bound: 6/7
shock rebound: 8/9
camber angle: 0.5/0.0
toe angel: 2.0/2.0
stabillizers: 4/4
brake: 24/24
Lsd torgue: 40/40
Lsd accel: 54/54
Lsd decel: 40/40
ASM: 0
TCS: 1
VCD: 40%

gear ratio
1st: 2.941
2nd: 2.005
3rd: 1.475
4th: 1.137
5th: 0.918
6th: 0.777

final: 4.363
Level 29

tires: racing medium soft tires front and back

so i hope i gave you guys enough information to help me with my question and once agian sorry for posting in these forums about gt3.
 
use sims and fenit with hp at 350-500 and take aids off.
one thing to remember about AWD drifting in gt3 is that your line is almost more important than anything else. so if your hitting the wall, inside or outside, the prob is your line.
the only way to really change your line mid-drift is the use of brake/accel. you should not be countersteering unless you get 90+*.
go view some AWD drift vids form gt3, esp ones that show the accel, wheel, speed, etc. this way you can watch what they are doing and how the car is reacting.

but as mdnite says, back to the gt3 forums this thread goes, sooner or later. prob sooner.

and another thing, use like 3.5 front camber and 2-2.5 rear camber.
 
Ah well, I can imagine it's a stupid problem that no one is on the GT3 forums ever again, but well..................no solution to it:scared::indiff: Tips already given, I hope this will work out................but get GT4 m8:sly:;)
 
yea sorry about that guys i really needed to know guess i will have to work on my line thanks for the help, and i will be getting gt4 soon just got to wait till the money is right
 
Back