help lfa drifting settings

  • Thread starter Thread starter paxic01
  • 8 comments
  • 1,995 views
Try these in exact order:
AUP
Drift setting depot
Capital letters.
 
Go to tuning thread at look for Team Shmo drifting garage. He might have one there
 
Go to tuning thread at look for Team Shmo drifting garage. He might have one there

Why bring up an old thread when it's already been answered?
 
FRONT:
springs - +1
damper bound - +8
rebound - +9
toe out - -99
camber - +8.0
ride height - -20
anti roll - +1
rear
toe out - -5
camber - +1.0
springs - +3
damper bound - +1
rebound - +1
anti roll - +5
ride height - +20

ok there you go.
 
FRONT:
springs - +1
damper bound - +8
rebound - +9
toe out - -99
camber - +8.0
ride height - -20
anti roll - +1
rear
toe out - -5
camber - +1.0
springs - +3
damper bound - +1
rebound - +1
anti roll - +5
ride height - +20

ok there you go.

No offence but that setup looks like it could kill someone :lol: but if it works for you.
 
HA that was the point I don't even know what he was asking so I just wrote down the dumbest numbers I could think of, hoping maybe he would try it.

the theory : the front is locked and slammed and the rear is jacked n bouncy AKA GOOD LUCK you'll probably need a lot
 
all i did with my LFA was upgrade it all the way lower the ride height down all the way and put the lsd all at 60
 
Back