Help with T3PA pedals.

[PeterPuck10CA]

So I'm using these add on pedals with the T300rs wheel. I select the wheel in the menus but when I race the clutch pedal is the acceleration and the brake is just fine. How can I set my acceleration on the proper pedal?

Please help thanks.

*quick note my th8a shifter comes in tomorrow* (will that fix the pedal mapping issue?)

 

[Sick Cylinder]

So I'm using these add on pedals with the T300rs wheel. I select the wheel in the menus but when I race the clutch pedal is the acceleration and the brake is just fine. How can I set my acceleration on the proper pedal?

Please help thanks.

*quick note my th8a shifter comes in tomorrow* (will that fix the pedal mapping issue?)

I don't have that set, but is the mode set correctly? On my T500RS set the pedals can be inverted and the mode button is used to swap the throttle with the brake pedal.

Have you tried connecting to a laptop and running through the test sequence / checking the mapping?

If you don't get an answer to your problem here, post it in the sim racing hardware section.

 

[PeterPuck10CA]

I don't have that set, but is the mode set correctly? On my T500RS set the pedals can be inverted and the mode button is used to swap the throttle with the brake pedal.

Have you tried connecting to a laptop and running through the test sequence / checking the mapping?

If you don't get an answer to your problem here, post it in the sim racing hardware section.

Thanks for the reply, I will try to see if the mode is set properly. If that doesn't work I'll connect to my laptop and check that way. Thanks again.