How far in can I drill into Dfpgt buttons

  • Thread starter Thread starter ck22
  • 2 comments
  • 719 views
ck22

ck22

Messages
20
Does anybody know how far you can drill into the Dfpgt paddle buttons . I don't want to go to far and wreck a new Dfpgt . I have clubsport paddles with spacers and want to mount them to the paddle buttons .Any suggestions would be appreciated.
 
ck22
Does anybody know how far you can drill into the Dfpgt paddle buttons . I don't want to go to far and wreck a new Dfpgt . I have clubsport paddles with spacers and want to mount them to the paddle buttons .Any suggestions would be appreciated.
Click to expand...

Have a look at this thread.
I'll check later, when I'll be home, the length of the CSpaddles spacers. Anyway you have to consider the fact that behind the DFGTpaddle button there isn't much of space...

Make sure your screws don't exceed behind the buttons, more than 4mm:nervous:
 
Thanks Mars. I turned the spacers sideways and filled the pre existing screw holes that was not needed after mock up with metal filler and marked up the spacers and paddle for new holes that would attach both paddle and spacer with the greatest amount of stability. I mocked it up using electrical tape and was happy with the results . I used motzkopf idea and approach as he also used the clubsport paddle and spacers on his Dfpgt buttons . I see you also mounted your diy spacer to buttons with two screws. I appreciate any know how you can give me l of how far I can drill . Thanks again. sorry for the long post.
 

Latest Posts

Back