How to know topsteed of any unknown car.

  • Thread starter Thread starter crazycrunk
  • 5 comments
  • 664 views
C

crazycrunk

Messages
44
Aruba
carribean
Messages
mrfunkyfresh4ya
Lets say im tuning a car that i dont know nothing of.
How can i still know the topspeed in an easy trick ?.

Normaly i put the suspension to min min.
After that i put a ridiculous number at topspeed and than start a topspeed run.

Lets say i tune for 3000m.
Than if the unknown car reaches 313 on 3000m line than my topspeed would be 333 313+20.

Okey i shared my exp with u guys.


Now feel free to write how u guys do it.
 
I don't know if this still works but try max/min for ride height...front high back low, not sure if it's ideal for 3k but for ultimate top speed it worked well.
 
Mikeybc
I don't know if this still works but try max/min for ride height...front high back low, not sure if it's ideal for 3k but for ultimate top speed it worked well.
Click to expand...

Yeh - I don't use min at the rear for 3k but I definitely raise the front up. For top speed I think your still right.

To the op: Min/min wouldn't serve any benefits IMO... But I'm no 3k pro.

Also to the op you'll likely get a better result with flipping the transmission too rather than just sliding the max speed to the right in transmission settings.
 
remember the fact that you run in kph where as 95% of us run in mph so its slightly different.

now if a car trapped 230, and had a redline of about 7000 rpm but made max power at 6000 id set my top speed to about 255 so i crossed in the power band making the most out of al my power.

lets say a car once again traps 230 and has a redline of 7000 rpm, and makes max hp at 6900 rpm, id set my top speed to 240-243 so i cross right on the redline at the end of the power band.
 

Latest Posts

Back