Imports

  • Thread starter Thread starter Puffy
  • 31,251 comments
  • 3,593,498 views
From Facebook by a builder named Oktech Alfa Romeo.
IMG_8190.webp
IMG_8191.webp
IMG_8192.webp
IMG_8193.webp
 
Chevrolet Firenza Can-Am out of South Africa. A little Vauxhall with a 302 V8 from the first generation Camaro Z/28.

image00004-3.jpeg

image00003-2.jpeg

image00001-3.jpeg


I can't find any evidence but I'm certain I've posted it before and possibly remarked on those neat little wheels.
 
Last edited:
Everything GM GMH and Vauxhall about it. Thanks for posting that. The rear taillights looked familiar. Looked it up and found this instead. Great googa mooga.

Only ten of these cars were built, and it would appear that all but one have vanished. Make no mistake, the car you’re looking at here is very special indeed. Though we should caveat that by saying that while it is indeed an HSX, it’s not in the specification it would have been originally. Instead, it now has a new, rust-free body, there are wide Group 4 arches fitted to each corner, and the car sits on a set of super wide 8×13 Minilite wheels wearing sticky Toyo 888 rubber. Under the bonnet, the 2.3 has gone, and has instead been replaced with a far more powerful C20XE Vauxhall engine. Fed by twin-Weber carbs, we can only imagine how angry it must sound. The transmission is a 240 Getrag five-speed. It’s a HSX alright, but one that’s been to the gym after supping on some protein shakes.
IMG_8241.webp
IMG_8242.webp


Here’s an original HS-X.
1778804558228.webp

1778804577965.webp

1778804597205.webp

1778804614603.webp

1778804645234.webp


Such a shame this didn’t happen in the states.
 
I like a vinyl top on a Viva/Magnum but they start in a bizarre place. I feel like it'd be a lot better farther down the pillar, like at the base of the windshield.

latest
20190901-160742-jpg-b7156870f1bd1cb5a1a91b23f29109e3.jpg

I like this one but what on Earth is going on with that motor? Is it canted over with flat cam covers?

Edit: lol. Oops. Profanity in a URL nerfs images apparently.
 
Last edited:
That top is weird. However, it’s a good and tight fit like a swim cap though.
 
Zeekr 001, my new favorite Chinese car.
Screenshot_20260514_214953.webp

Xiaomi YU7 is like a 720S in front and an Aston One-77 in back, but I think it's just mega cool.
Screenshot_20260517_141646.webp
 
Last edited:
They both look really good, IMO.

Love that cheeky Advan decal on the Zeekr.
 
The Rootes Group had a reputation (deserved) of badge engineering, but c’mon… Could you say no to these little cuties?

1960 Singer Gazelle Convertible
IMG_4486.webp


1962 Hillman Minx Mark IIIC convertible
IMG_4487.webp


1958 Sunbeam Rapier Series 2 convertible
IMG_4488.webp
 
I favor the notchback Type 3s and tend to overlook the squarebacks and fastbacks, but this one looks great. I love 4-lug Sprint Stars.

62d7f38d3b37dc593463e6102f71ded6.jpg


I think I've probably posted it before but this notch is simply stunning.

465dd1649846e13a47fed4ff93840ce3.jpg
 
This notch looks like a lot of fun, and great color combination.

120209997-1.jpg


Yellow lenses are fine but I'm not a fan of Rossi shells on basically anything, save for maybe a Type 2 (but it's still iffy and depends heavily on the overall build).
 
Last edited:
What are "Rossi shells"?
Headlight housings for early Beetles, up to '66, originally manufactured by Italian aftermarket house Rossi and featuring an open round headlight instead of the domed outer lens and an integral turn signal.

718476.jpg


They were originally offered through the '70s and '80s, but by the '90s, when I was active in the air-cooled Volkswagen scene, they absolutely exploded and chromed plastic repops were everywhere.

Early Beetle (and Type 2) headlights are interchangeable with Porsche 356 units so they are a direct fit on the cars, but they aren't often seen I assume because they're pretty tacky.

On the 356 they remind me of US-spec 911 sugar scoops.

IMG_51691694276028.jpg
 
Last edited:
Back