Need help with a H100i in a HAF X Big Tower!

  • Thread starter Phoenix
  • 4 comments
  • 652 views
Phoenix

Phoenix

Premium
5,983
Norway
Norway
Ok, so i've mounted the radiator and fans, but now I can't find where the pump power header should go.

The old one is a 4 plug contact, but the new one is a flat long one.

Anyone know?

Let me know ASAP please!

The white one is my old plug, I believe its 4pin molex while the new one is the black plug on the left. Sata power cable or something.

I need this. But I cannot find it anywhere...
SATA-Power-Cable-1.jpg
 
Last edited:
So your power supply does not have that type of power connector?

You have two leads on the H100i. One goes to the CPU fan header on the motherboard and the second, you can use a SATA power lead from your PSU. If you don't have a SATA power lead, then yes, you will need an adapter like you have shown in the post above.
 
Pako
So your power supply does not have that type of power connector?

You have two leads on the H100i. One goes to the CPU fan header on the motherboard and the second, you can use a SATA power lead from your PSU. If you don't have a SATA power lead, then yes, you will need an adapter like you have shown in the post above.
Click to expand...

Yeah, I figured after searching through all the cables for the hundredth time.

Took me a while to find a shop (that was open) that had one. But I finally found one.

Holding my breath hoping its the correct one.
 
If you do require an adapter, then I believe I have one lying around.
 

Latest Posts

Back