PTCruiser Settings

[glacierdustGT]

I have a PTCruiser and I am working on the Stars and Stripes in begginner league, and I need to beat it because... I cant get by it and its starting to get to me. I have a stage 2 turbo and a full-customize race suspension. I lowered the car as low as it possibly can, and I think I screwed it up a little. I'm working on it and its getting bettter, but I was wondering if anyone had any settings for it? THANKS!

 

[Power Slay`d]

Try to get the following as money become available:
Racing chip
Racing exhaust
Racing flywheel
Triple clutch plats
Customizable gears
Sports tires or better medium slicks
Weight redaction stage 1 and 2 then later 3
The brake kit and later the brake balance kit
Then the rest as you please…
Try save money to buy the better expensive part instead of the cheep one now and later the better one.

Settings for a maxed out tune(but will work)

Springs 8.5 / 6.5 {front / rear}
Height down to bottom
Bound 5 / 5
Rebound 7 / 7
Camber 3.0 / 1.4
Toe 0 / 0
Stabiliser 4 / 3

Brake balance 16 / 15

{to the front}
LSD Initial 6 (this sets the strength of the torque transferred to the other wheel.)
LSD Accel 15-20 (the higher its set the harder it turn under power)
LSD Dec 10-15 (the higher its set the harder it turn under no power)
The lower the setting the more only one wheel works, and that will be the one with less grip around the turn.

Gears:

Final 4.500 set this first
Auto gear level 30 (sliding this moves the green line {the gears} Now the most right-top corner is abut 200 m/h. {middle top is 100 m/h} and where the last line goes of the graft is the speed at the rev-limed.)
Setting the final to higher for more Accel/Power and lower for top-end speed.

ASM 0-4 (this stops the car from spinning out but set it to high the car is slower and turns harder)

TCS 1-4 (this device senses wheel spin and cuts the gas to stop it. Helps in turns but also makes it slower.)