Trusthmaster TMX table fixer problem

[Iosif Lengyel]

I can't fix my wheel to the table anymore so I need options. One of my friends told me to use
cuppings or 3M Tape (square ones). I think about fixing the wheel on a pieces of wood with the 3M Tape and hope the wood dosen't move to much when I play. I have no warranty tho.

 

[mrbasher]

Maybe bolt your wheel to a board, then clamp the board to your desk or whatever you're using?

 

[super_gt]

I can't fix my wheel to the table anymore so I need options.

Why?Broken clamp?

RICMOTECH HARD-MOUNT ADAPTER FOR T150 AND TMX WHEELS

 

[Iosif Lengyel]

I use a desk and the broken part is the thing that I screw the bolt in, it popped out and I tried to glue it but iti didn't work.

 

[super_gt]

I use a desk and the broken part is the thing that I screw the bolt in, it popped out and I tried to glue it but iti didn't work.

Can you take a picture?

 

[Iosif Lengyel]

 

[super_gt]

This is very bad.Give me time to think.

 

[fatkrakr]

I would purchase the Richmotech adapter and get some epoxy https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias=aps&field-keywords=epoxy+for+plastic and bond the base and adapter together. Then get a piece of wood and drill holes to mount it to the wheel base. Then some clamps https://www.amazon.com/dp/B000NY32AI/?tag=gtplanet-20 at whatever size you need for the thickness of your desk to clamp it to the desk.

 

[Iosif Lengyel]

I have to find those stuff in my country first (Romania), but thanks anyway. I welcome other ideas btw

 

[super_gt]

I would purchase the Richmotech adapter and get some epoxy https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias=aps&field-keywords=epoxy+for+plastic and bond the base and adapter together. Then get a piece of wood and drill holes to mount it to the wheel base. Then some clamps https://www.amazon.com/dp/B000NY32AI/?tag=gtplanet-20 at whatever size you need for the thickness of your desk to clamp it to the desk.

Simple and easy solution he will only have to remove the legs from the wheel base.👍

@Isif Lengyel

As you can see in the picture there is an opening which will give you access to the screw hole.This will allow you to use nut with washer for M10 bolt and you will be able to screw the Richmotech adapter to the wheel.
But you will have to remove the wheel and the front panel of the wheel base ,which is very tricky and there is a high risk to damage wire and make the buttons of the wheel and front panel useless.
Think twice before using my solution,it is hard to do.