ZZII Drag Tune Help (Indy 1/4)

  • Thread starter Thread starter PlanetChesse
  • 8 comments
  • 4,657 views
PlanetChesse

PlanetChesse

Messages
50
Canada
Canada
Messages
PlanetChesse
Messages
Cp The Kingz
So.. I got this car as a gift and I cant get the right tune on it. :'( It only gets 150MPH on the trap! D: So anything can help me, If you see some errors with the tune please help me out. :) AWD , I'm launching in 1st gear

Suspension
Height: 0/15
Spring Rate: 20.0/17.5
Damper Extension: 10/1
Damper Compression: 1/10
Anti-Roll Bars: 5/5
Camber: 0.0/0.0
Toe Angle: 0.45/0.70


Gearbox
1st: 3.203
2nd: 2.563
3rd: 2.024
4th: 1.599
5th: 1.274
6th: 1.050
Final: 3.870


LSD
Initial Torque: 60/60
Acceleration Sensitivity: 60/60
Braking Sensitivity: 5/5
Torque Distribution: 40/60

Currently doing: 153MPH at trap.
 
Last edited:
Mine traps 156 so your not that far away. First, chane your torque distribution to 40/60. Toe: 0.45/0.70. Dampers, 10/1, 1/10, anti roll bars, 1/1, height min front, max rear, and lower your spring rates dramatically. They should never be the same.
 
i trap mine at 157/158mph and what slashfan said is correct. your suspension is way to stiff and not allowing proper weight transfer of the vehicle.
 
slashfan7964
Mine traps 156 so your not that far away. First, chane your torque distribution to 40/60. Toe: 0.45/0.70. Dampers, 10/1, 1/10, anti roll bars, 1/1, height min front, max rear, and lower your spring rates dramatically. They should never be the same.
Click to expand...

Thanks for your help man. Does 12.0/16.0 sound good for the spring rates?
 
slashfan7964
Mine traps 156 so your not that far away. First, chane your torque distribution to 40/60. Toe: 0.45/0.70. Dampers, 10/1, 1/10, anti roll bars, 1/1, height min front, max rear, and lower your spring rates dramatically. They should never be the same.
Click to expand...

Does it look any better ? :D
 

Latest Posts

Back