- 5,230
- Buckeye Nation
Thats right,a 1 year Premium Membership is up for grabs here.
All you have to do is take this 20 question "Mopar Trivia Quiz".The member who answers the most questions correctly will be the winner....Simple.
A few things first,before we get on with this :
1.)You must be a non-premium member in good standing to be declared the winner.Why would I give out a Premium Membership to someone who thinks it's cool to collect infractions in this forum,or to someone who is soon to get booted out of here.Your name will be submitted to Jordan or a Mod,to make sure you are a member in good standing.
2.) In case of a tie,there will be a "Quiz Off",5 more questions will be posted up. This will go on until we have just a lone member standing.
3.) You will only be allowed to respond to the questions one time.Once you post your answers,your done....no going back and editing.Kind of like being in school,once you hand in your test to the teacher,you can't go back up to them and ask for it back so you can redo your answers.I will post your scores on this page.
Are you ready to take the test for a 1 year Premium membership ? Lets do it Guys and Girls. Good luck to all who enter !!!!!
1.) In 1970,the Plymouth AAR 'Cuda and the Dodge T/A Challenger both used a 340 c.i. smallblock engine which was topped off with a tri-power setup (3 2bbl. carbs).Plymouth had a certain name for their tri-power setup and Dodge had a name for their tri-power setup. What were the 2 names that each one used ? (specify which name goes with each make please).
2.) The 1970 Dodge T/A Challenger used some wording which appeared 3 times on this car. Once on the air cleaner,on the right front fender,and on the left front fender.However,it was spelled differently on the air cleaner than the fenders.What was the spelling difference ?
3.) The 426 Hemi is probably Mopars most famous engine.Produced between the years 1964-1971.This was not Mopars first venture into the world of the Hemi engine,there have been several variations and cubic inch displacements over the years. What was the 1st year and what was the 1st cubic inch displacement that it came to be offered to the public ?
4.) In 1970,the 426 Hemi underwent an internal engine modification. What was this modification ?
5.) 2 winged cars were produced.1 by Dodge, and 1 by Plymouth. What were the names of these winged warriors and their corresponding years ?
6.) A certain 60's era Mopar (3 consecutive years) used the same front bumper as it did on the rear.Do you know what 3 years and on which model this was done on ?
7.) The 1971 Dodge Challenger R/T could be ordered with 4 different colored bumble bee stripes around the rear end of the car. What were these 4 colors that could be ordered ?
8.)In what year and on what car did the factory first install a dash mounted tachometer ?
9.) The famous Max Wege big block engines were not produced at the traditional big block engine plant. Where were they produced at ?
10.) On the 1971 Charger R/T,if the A54 code (colored bumper group),(to match car) was ordered,2 other options were automatically deleted.What were the 2 options that got automatically deleted ?
11.) In what year and on what applications did Mopar first install factory hood pins ? and why ?
12.) In 1965,Dodge built the altered wheelbase Coronet,and Plymouth built the altered wheelbase Belvedere.These cars were built for use for drag racing purposes only.However,due to a request,Dodge did build some some altered wheelbase cars for a certain customer. Who was this customer and what was the model name of the car ?
13.) Name the year and model of the car in which Chrysler first used the dual 4 barrel intake system ?
14.) The "B" series big block was available in 4 different cubic inch displacements over the years.What were these 4 cubic inch displacements ? (careful here,2 may be overlooked).
15.) The "RB" series big blocks were available in 4 cubic inch displacements also. What were these displacements ? (be very careful here,there is 1 that will probably be overlooked).
16.) On the 1964 Plymouth Sport Fury,what was the difference on the transmission that seperated it from all the other 1964 production cars ?
17.) What award did the 1969 Plymouth Roadrunner recieve ?
18.) In 1969,all Chrysler Corporation vehicles produced were in direct violation of federal law. What did they do wrong ?
19.) Carrol Shelby teamed up with Chrysler in the 80's to build some performance front wheel drive cars for them,which included the GLH and the GLHS. What do GLH and GLHS stand for ?
20.) Legendary Mopar racers,Sox and Martin really put Mopar on the map in the world of Drag Racing.
A.) In what year did they win their first event ?
B.) What event was this ? and where was it held ?
C.) What kind of car were they using in this event ?
D.) What was their prize for winning this event ?
E.) What did they do with the prize that they won ?
F.) What was Sox's first name ? What was Martins first name ?
(all 6 questions A-F must be answered to be correct) ( no partials )
Once again.....good luck to all !!!!!
This contest will end on Friday,July 17th
***** ALL ANSWERS MUST BE IN THE FORM AS A PRIVATE PM TO ME,AS TO AVOID ANSWER STEALING *****
Rotary Junkie - responded to 11 out of the 20 questions and got 9 of them correct.
Codename L - responded to 15 out of the 20 questions and got 9 of them correct.
Greycap - responded to all 20 questions and got 18 of them correct.
All you have to do is take this 20 question "Mopar Trivia Quiz".The member who answers the most questions correctly will be the winner....Simple.
A few things first,before we get on with this :
1.)You must be a non-premium member in good standing to be declared the winner.Why would I give out a Premium Membership to someone who thinks it's cool to collect infractions in this forum,or to someone who is soon to get booted out of here.Your name will be submitted to Jordan or a Mod,to make sure you are a member in good standing.
2.) In case of a tie,there will be a "Quiz Off",5 more questions will be posted up. This will go on until we have just a lone member standing.
3.) You will only be allowed to respond to the questions one time.Once you post your answers,your done....no going back and editing.Kind of like being in school,once you hand in your test to the teacher,you can't go back up to them and ask for it back so you can redo your answers.I will post your scores on this page.
Are you ready to take the test for a 1 year Premium membership ? Lets do it Guys and Girls. Good luck to all who enter !!!!!
1.) In 1970,the Plymouth AAR 'Cuda and the Dodge T/A Challenger both used a 340 c.i. smallblock engine which was topped off with a tri-power setup (3 2bbl. carbs).Plymouth had a certain name for their tri-power setup and Dodge had a name for their tri-power setup. What were the 2 names that each one used ? (specify which name goes with each make please).
2.) The 1970 Dodge T/A Challenger used some wording which appeared 3 times on this car. Once on the air cleaner,on the right front fender,and on the left front fender.However,it was spelled differently on the air cleaner than the fenders.What was the spelling difference ?
3.) The 426 Hemi is probably Mopars most famous engine.Produced between the years 1964-1971.This was not Mopars first venture into the world of the Hemi engine,there have been several variations and cubic inch displacements over the years. What was the 1st year and what was the 1st cubic inch displacement that it came to be offered to the public ?
4.) In 1970,the 426 Hemi underwent an internal engine modification. What was this modification ?
5.) 2 winged cars were produced.1 by Dodge, and 1 by Plymouth. What were the names of these winged warriors and their corresponding years ?
6.) A certain 60's era Mopar (3 consecutive years) used the same front bumper as it did on the rear.Do you know what 3 years and on which model this was done on ?
7.) The 1971 Dodge Challenger R/T could be ordered with 4 different colored bumble bee stripes around the rear end of the car. What were these 4 colors that could be ordered ?
8.)In what year and on what car did the factory first install a dash mounted tachometer ?
9.) The famous Max Wege big block engines were not produced at the traditional big block engine plant. Where were they produced at ?
10.) On the 1971 Charger R/T,if the A54 code (colored bumper group),(to match car) was ordered,2 other options were automatically deleted.What were the 2 options that got automatically deleted ?
11.) In what year and on what applications did Mopar first install factory hood pins ? and why ?
12.) In 1965,Dodge built the altered wheelbase Coronet,and Plymouth built the altered wheelbase Belvedere.These cars were built for use for drag racing purposes only.However,due to a request,Dodge did build some some altered wheelbase cars for a certain customer. Who was this customer and what was the model name of the car ?
13.) Name the year and model of the car in which Chrysler first used the dual 4 barrel intake system ?
14.) The "B" series big block was available in 4 different cubic inch displacements over the years.What were these 4 cubic inch displacements ? (careful here,2 may be overlooked).
15.) The "RB" series big blocks were available in 4 cubic inch displacements also. What were these displacements ? (be very careful here,there is 1 that will probably be overlooked).
16.) On the 1964 Plymouth Sport Fury,what was the difference on the transmission that seperated it from all the other 1964 production cars ?
17.) What award did the 1969 Plymouth Roadrunner recieve ?
18.) In 1969,all Chrysler Corporation vehicles produced were in direct violation of federal law. What did they do wrong ?
19.) Carrol Shelby teamed up with Chrysler in the 80's to build some performance front wheel drive cars for them,which included the GLH and the GLHS. What do GLH and GLHS stand for ?
20.) Legendary Mopar racers,Sox and Martin really put Mopar on the map in the world of Drag Racing.
A.) In what year did they win their first event ?
B.) What event was this ? and where was it held ?
C.) What kind of car were they using in this event ?
D.) What was their prize for winning this event ?
E.) What did they do with the prize that they won ?
F.) What was Sox's first name ? What was Martins first name ?
(all 6 questions A-F must be answered to be correct) ( no partials )
Once again.....good luck to all !!!!!
This contest will end on Friday,July 17th
***** ALL ANSWERS MUST BE IN THE FORM AS A PRIVATE PM TO ME,AS TO AVOID ANSWER STEALING *****
Rotary Junkie - responded to 11 out of the 20 questions and got 9 of them correct.
Codename L - responded to 15 out of the 20 questions and got 9 of them correct.
Greycap - responded to all 20 questions and got 18 of them correct.
Last edited:
.I have a feeling that there will be someone scoring high on this one.
