ae-86 help

  • Thread starter Thread starter icedeamon83
  • 10 comments
  • 1,059 views
Messages
4
United States
United States
Messages
icedeamon83
I want to set up the initial d version of the 86 for non drifting and less wheel spin coming out of corners, please some one help me
 
Look in the tuning forums, surely someone has tuned the 86 before. Also with the "less wheel spin" part you could always apply the throttle softly not with a lead foot 👍
 
Wait. When I first clicked the Priano link it took me to the '86 Celica. Clicked it just now to link it and it went to the AE-86… so, nevermind me! The '86 is two cars up from the AE-86
 
I want to set up the initial d version of the 86 for non drifting and less wheel spin coming out of corners, please some one help me

I'll try and give it a look later, any particular spec (pp/tyres) or shall I just tune it as it comes?
 
Toyota SPRINTER TRUENO GT-APEX (S.Shigeno Ver.) '00

Wheel / Joypad: PS3 controller
Power: 207 BHP @ 9500 Rpm / 17.5 kgfm @ 7500 Rpm
Weight: 825 kg
Performance Points: 434 PP
Wheels: Standard Size
Fitted parts:
Tires:
SH
Weight Distribution: 58:42

Suspension : (Height-Adjustable, Fully-Customisable Suspension)

Ride Height: Front: 100 Rear: 100
Spring Rate: Front: 7.03 kg Rear: 5.09 kg
Dampers (Compression):Front: 4 Rear: 7
Dampers (Extension): Front: 7 Rear: 4
Anti-Roll Bars: Front: 4 Rear: 5
Camber Angle (-): Front: 0.0° Rear: 0.0°
Toe Angle: Front: 0.15° Rear: 0.04°

Brakes: Racing Upgrade F: 8 R: 6 (ABS 1)


Drivetrain: (Fully Customisable Transmission)

1) Set final to 5.500
2) Set Max Speed to 112
3) Set in sequence (5-4-3-2-1)

1: 3.465
2: 2.470
3: 1.850
4: 1.450
5: 1.190

Final: 3.500​


Differential Gear: Fully Customisable Mechanical Limited-Slip Diff​

Initial Torque: R= 10
Acceleration Sensitivity: R= 10
Braking Sensitivity: R= 10

Clutch & Flywheel:
Triple-Plate
Propeller Shaft: Standard


Power

Oil Change:
No
Power Limiter: 100%
Engine Tuning: Standard
Computer: Standard
Exhaust: Semi-Racing
Exhaust Manifold: Standard
Catalytic Converter: Standard
Intake Tuning: Standard
Turbo Kit: Stage: Standard
Nitrous Oxide (N2O): No

Body

Body Rigidity Improvement:
No
Downforce: F: 0 R: 0
Weight Reduction: Standard
Bonnet: Standard
Windows: Standard
Ballast: 0 kg
Ballast position: 0
 
Back