csr elite brake pedal

[dazzwilko]

not happy with the feel of the brake pedal on my csr elites, what hole have you guys got yours adjusted to, is it easy to adjust them.??

 

[GTP_Plato]

How long have you been using the pedals for out of interest? What is it you don't like about the feel?

 

[VWMasteR]

If you are new to the elite you need to real get a feel for that pedal and use the knob to tune it in to how you want to drive

 

[FCTaff]

I would not recommend moving the bar to a diff hole, as others say use the knob to adjust and give it time to get used to the feel.

 

[GTP_Plato]

If it's the stiffness you don't like and you are new to them, it takes a while to ware them in and there will be a noticeable difference in the resistance.

 

[dazzwilko]

they dont seem to be stiff enough compared to the g25 pedals i had previously.
i've been looking at loads of pictures and videos tonight and seems like every set i see are on the second hole where as mine are set to the first.i got them on ebay.

 

[dazzwilko]

changed it to the second pin hole (2minute job) and all is good!
nice and stiff and i dont have to press the brake pedal to the fully flat position (almost touching the loadcell) to get 100% braking. i now see what al the fuss was about and now want the csp set for the brake pedal vibration.!!!

 

[GTP_Plato]

Nice to see it was a quick fix for you 👍

 

[lemansfanatic]

If it's the stiffness you don't like and you are new to them, it takes a while to ware them in and there will be a noticeable difference in the resistance.

+1 i didnt like the feel either until they wore in and i go them tuned right. it took a lot of tuning differnt games menus too... But you got yours fixed so all is well