i never liked the pedals position, so i decided to invert the pedals and mount it on wall (rally/gt style).
It's very easy.
1 Open the pedals case.After removing all screws, aply some force with a knife or something like that to open the case.
2 Inside you can see 2 potenciometrs, 3 terminals in wich one.
Gas
2 Red wires
1 White wire
2 Black wires
Brake
1 Red
1 green
1 black
3 Now we have to invert the wires.
Gas goes to brake and vice versa.
Also invert the polarity. Shoud be something like this:
Gas Red ----- Brake Black
Gas White ----- Brake Green
Gas Black ----- Brake Red
4 Mounting should be done in the reverse order.
Springs have position, it's easy to see.
The potenciometers also have a slot where they are fitted.
Now you can mount the pedals on a wall.
For me it's much more confortable.
It's very easy.
1 Open the pedals case.After removing all screws, aply some force with a knife or something like that to open the case.
2 Inside you can see 2 potenciometrs, 3 terminals in wich one.
Gas
2 Red wires
1 White wire
2 Black wires
Brake
1 Red
1 green
1 black
3 Now we have to invert the wires.
Gas goes to brake and vice versa.
Also invert the polarity. Shoud be something like this:
Gas Red ----- Brake Black
Gas White ----- Brake Green
Gas Black ----- Brake Red
4 Mounting should be done in the reverse order.
Springs have position, it's easy to see.
The potenciometers also have a slot where they are fitted.
Now you can mount the pedals on a wall.
For me it's much more confortable.
Last edited: