FRL~ToCA13 - CONGRATULATION NINNERS, 3-TIME ToCA CHAMPION!Finished 

  • Thread starter Furinkazen
  • 2,889 comments
  • 78,598 views

Take a race off the calendar and move subsequent events up a week?

  • Yes, take out Suzuka!

    Votes: 6 28.6%

  • Yes, take out Nurburgring!

    Votes: 0 0.0%

  • No, let's keep running!

    Votes: 4 19.0%

  • Yes, Willow Springs (if it is not too late)

    Votes: 11 52.4%
  • Total voters
    21
  • Poll closed .
I'll be there tonight as well (won't mind not watching Top Gear live), just finished building cars to spec (sort of :P)...

Few mistakes noted in OP, @Furinkazen:

Can't change setting in RA menu in online lobbies;
Fuel info regarding Bathurst out of context here;
Mentioning ToCA12 instead of ToCA13 (found earlier by @True-blue-8);
As mentioned by @Andil, Audi spec sheet mentions 503 PP for that car, but after following it to the letter the car sits at 505 PP.


Also, some extra info for you to add to OP:

Club ID for post #2 - 1001683;
Audi spec sheet - PL 87.9% Ballast 0 kg (at 505 PP);
Citröen spec sheet - PL 95.8% Ballast 0 kg;
Honda spec sheet - PL 93.6% Balast 0 kg;
Mazda spec sheet - PL 90.8% Ballast 0 kg;
Renault spec sheet - PL 97.3% Ballast 55 kg.


To end, a few questions:

Regarding timetable, aren't you going to keep procedure of opening new lobby after Q1, to avoid connection issues?;
As for Qualifying sessions, will both sessions have similar weather as R1? Your OP info on this is kinda confusing;
We know that DNF will award you last place points at time of DC (if applicable), but what about DNS?



EDIT: In my opinion Renault should use standard sized rims, as right now it looks odd when compared to the other cars...
 
Yeratel84
I'll be there tonight as well (won't mind not watching Top Gear live), just finished building cars to spec (sort of :P)...

Few mistakes noted in OP, @Furinkazen:

Can't change setting in RA menu in online lobbies;
Click to expand...
You never know if an update will secretly fix it.

Yeratel84
Fuel info regarding Bathurst out of context here;
Mentioning ToCA12 instead of ToCA13 (found earlier by @True-blue-8).
Click to expand...

Noted 👍

Also, some extra info for you to add to OP:

Yeratel84
Club ID for post #2 - 1001683;
Audi spec sheet - PL 87.9% Ballast 0 kg (at 505 PP);
Citröen spec sheet - PL 95.8% Ballast 0 kg;
Honda spec sheet - PL 93.6% Balast 0 kg;
Mazda spec sheet - PL 90.8% Ballast 0 kg;
Renault spec sheet - PL 97.3% Ballast 55 kg.
Click to expand...

PL is not needed, ballast on Renault? :odd: something got mixed up there.

Yeratel84
To end, a few questions:

Regarding timetable, aren't you going to keep procedure of opening new lobby after Q1, to avoid connection issues?;
As for Qualifying sessions, will both sessions have similar weather as R1? Your OP info on this is kinda confusing;
We know that DNF will award you last place points at time of DC (if applicable), but what about DNS?
Click to expand...

Will open new lobby if we have had lots of drivers, of only 4 or 5 have done Q1 no point.

Intention is to keep weather same for FP through to R1.

DNS, was going to raise that in stewards.


Should have updates done before tonights test.

LancerEvo7
Renault has ballast?
Click to expand...

Must have missed something.
 
Found out you put WR3 for Renault instead of WR2 (which puts its weight at 1191kg without ballast)

Also, what about Audi spec sheet?


EDIT: Also check Renault rim size (you'll see it will fit better with other cars if you follow my suggestion)
 
Yeratel84
Found out you put WR3 for Renault instead of WR2 (which puts its weight at 1191kg without ballast)

Also, what about Audi spec sheet?


EDIT: Also check Renault rim size (you'll see it will fit better with other cars if you follow my suggestion)
Click to expand...

Currently updating on my laptop now. Audi had an extra part on it left over from spec tests.
 
OP UPDATE 1.01 (1st February)
Fixed Brands Hatch dates (wrong layout)
Fixed Audi TTS Spec (Removed incorrect POWER II parts)
Fixed Renault Megane Spec (Weight figures and WR now fixed)
Fixed/Updated Race Timings (ToCA12 typo fixed, Club ID added)
Fixed Timetable formatting (Text clipping in Q1 description)
 
Furinkazen
OP UPDATE 1.01 (1st February)
Fixed Brands Hatch dates (wrong layout)
Fixed Audi TTS Spec (Removed incorrect POWER II parts)
Fixed Renault Megane Spec (Weight figures and WR now fixed)
Fixed/Updated Race Timings (ToCA12 typo fixed, Club ID added)
Fixed Timetable formatting (Text clipping in Q1 description)
Click to expand...
But where are the entry lists?
 
Furinkazen
OP UPDATE 1.01 (1st February)
Fixed Audi TTS Spec (Removed incorrect POWER II parts)
Click to expand...

Following your updated spec sheet, we reach 504 PP instead of 503 PP...

Furinkazen
OP UPDATE 1.01 (1st February)
Fixed Timetable formatting (Text clipping in Q1 description)
Click to expand...

Q2 description is cut mid-sentence. If you don't want to add a second line, you can change last sentence to "These drivers may also join mid-session"
 
Yeratel84
Following your updated spec sheet, we reach 504 PP instead of 503 PP...

Q2 description is cut mid-sentence. If you don't want to add a second line, you can change last sentence to "These drivers may also join mid-session"
Click to expand...

I'll check it out tonight 👍
 

Latest Posts

Back