g27 calibration problem?

[zedfonsie]

After about 30 minutes of normal racing it gets off calibration.
But when drifting after 30 seconds my wheel is 180 degrees
and it thinks its straight.

What do I do?

 

[A1-242]

I've just been lapping on the GT Academy eifel track & have noticed the same thing happening, after a couple of laps it starts going off centre & gradually gets worse.

 

[JeffF]

I haven't had this problem personally but I have read of it elsewhere, hopefully someone knows whats up with this issue

 

[Zimzallabim90]

This happened to mine, it's a loose part inside the wheel. If your warranty is still good you can send in the wheel for a new one, and if not you can fix it yourself by gluing something inside the wheel. There are tutorials online of how to do it I believe. I sent mine in and got a new one

 

[liQster]

This happened to mine, it's a loose part inside the wheel. If your warranty is still good you can send in the wheel for a new one, and if not you can fix it yourself by gluing something inside the wheel. There are tutorials online of how to do it I believe. I sent mine in and got a new one

logitech wanted it back? i didn´t even had to send my old one back, but got a new set 3 days after my complain :x

 

[Zimzallabim90]

Really? That's weird but kind of cool. They only had me send the wheel itself, but they sent me a completely new set of everything so now i've got an extra shifter and pedal set

 

[A1-242]

As well as the wheel calibration problem it has now developed a problem with the brake pedal. Every now & again (which in a race is way too much) the brake pedal doesn't fully release.

I tried Logitech support but you cant send an email without the serial number (i have the m/n & p/n, but cant find a serial number).

I have now contacted YOYOtech where i purchased it from.

Hopefully i'll have it sorted out soon, i'll let you know how i get on.

 

[skubaben]

Same thing happend to my first Gt3 rs v2. And Volt on the charger on that wheel had more thene the one i got after

 

[A1-242]

Had an email this morning from YOYOtech, telling me to contact Logitech, as it was just over a year old. Which i did straight away, i now have a brand new G27 on its way.

 

[NotSoSilentBob]

http://www.jlvrh.de/G27_UK.htm

Here is the Link that I have used 4 times to repair my G27. First 3 times it was the black sensor glue failing on the Shaft and loosing Center. The last time it was the 2 screws behind the circuit board that were loosening themselves from the Heating/cooling and walked themselves almost out of all the threads. I just used Gorilla glue on the Sensor shaft and for the 2 screws I used Lock-tight and its been almost a month now of no troubles.