How to switch between ds3 and g27?

[sagaper]

I'm trying to teach me to drive with the steering wheel.
So i think that if i can manage a race wiht ds3, I shud make it whit the g27.
So is there an easier way to switch between ds3 to g27 then pull out the usb cabel?

 

[CBH]

I'm trying to teach me to drive with the steering wheel.
So i think that if i can manage a race wiht ds3, I shud make it whit the g27.
So is there an easier way to switch between ds3 to g27 then pull out the usb cabel?

Just stick to your G27 because it is better using a wheel than a DS3 in GT6.

 

[Northstar]

So is there an easier way to switch between ds3 to g27 then pull out the usb cabel?

Hold the PS button on the DS3, you can select the controller #.

 

[sagaper]

Hold the PS button on the DS3, you can select the controller #.

The problem is not to switch from ds3 to g27. But to swich from g27 to ds3.

 

[sagaper]

Just stick to your G27 because it is better using a wheel than a DS3 in GT6.

I trying to learn to drive whit g27. But I thought that if I could run track whit ds3, then i should manage i wiht g27. The goal is to always run with g27

 

[CBH]

I trying to learn to drive whit g27. But I thought that if I could run track whit ds3, then i should manage i wiht g27. The goal is to always run with g27

You can not to switch from G27 to ds3. Always try to used the G27 because it may mess up your driving.

 

[sagaper]

I'm trying out g27 on

National B FF challenge: Tsukuba Circuit and I driving the:
Scirocco GT24 15th Anniversary Edition best lap so far is 1:08:...

I am driving manual transmission and use the f1 gears. And only drivers aids is traction control on 5.

 

[SkylineR88]

press/hold the ps button on the controller then make controller number 1???

 

[sagaper]

press/hold the ps button on the controller then make controller number 1???

When i do that the ps3 says that the controler(ds3) alredy is controler numder 1

 

[CBH]

Bluntified, Is right in his post.

 

[rankings18]

turn off power supply to g27, set ds3 to controller 1. Easiest way is to use a surge protector connected to g27, turn it off/on by a flip of a switch

 

[Bluntified]

You can't switch from the G27 to DS3, it won't let you. If you change the DS3 to controller 1, it only allows to you navigate menus etc. If you do that, you still cannot steer while driving! The G27 always takes priority.

Only solution is to unplug the USB cable from the PS3, works fine as I've been doing it for years when my wheels starts getting hot. Just to add, I've never unplugged the power cord and I've been using it since 2010(?).

Edit: Stick with the wheel, you'll get better with time, switching back and forth will slow your progress down quite a bit.

 

[sid77]

Just make sure your DS3 is set to controller 1 and they both work fine at the same time. I do this because i like to use the DS3 controls when im navigating the menus and playing around in the photo app.

Works perfectly for me.

 

[Staquix]

Thanks sid i was about to make a new post on how to navagate menus in photo mode when useing the g27.

 

[sagaper]

Thanks, guys

Just make sure your DS3 is set to controller 1 and they both work fine at the same time. I do this because i like to use the DS3 controls when im navigating the menus and playing around in the photo app.

Works perfectly for me.

This I had already figured out myself