i need some help with the pcb in the g27 shifter

[htidxstorm1]

hello guys just need a little help what is the thing in the black circle are they resistors?

 

[sesselpupser]

It's a 10k ohm resistor, they're very common. You don't have to replace it with an SMD type resistor (though you'll have to be creative about how you wire the new one in), you can use a through hole version instead, but you can't buy just one unless maybe your local Maplin has a parts desk. If you know any electronics hobbyists they'll definitely have one you can have, if not I usually buy stuff like this from here.

 

[htidxstorm1]

It's a 10k ohm resistor, they're very common. You don't have to replace it with an SMD type resistor (though you'll have to be creative about how you wire the new one in), you can use a through hole version instead, but you can't buy just one unless maybe your local Maplin has a parts desk. If you know any electronics hobbyists they'll definitely have one you can have, if not I usually buy stuff like this from here.

thanks for the reply, so if i get one of those resistors and solder it on it should work fine again

 

[htidxstorm1]

so would these work http://www.ebay.co.uk/itm/100x-0-25...mponents_Supplies_ET&var=&hash=item3ce2793fe1

 

[sesselpupser]

so would these work http://www.ebay.co.uk/itm/100x-0-25...mponents_Supplies_ET&var=&hash=item3ce2793fe1

Yeah, those would work but if you can get 0.125W resistors they'll be a bit smaller.

 

[htidxstorm1]

Yeah, those would work but if you can get 0.125W resistors they'll be a bit smaller.

ok thanks for all the help, im so happy il be able to use my g27 again

 

[htidxstorm1]

hey neema_t is there any chance of getting a hand to wire the new resistor up if i post pictures because you seem to know what your on about