@racinglife85
On this subject, it’s very personal because it depends on your driving position, your preferences... the important thing is to be comfortable.
Then, with the mod 3DRap, it depends on the number of spacers you use.
I give you my method for my personal preferences:
- Installation of all the spacers of the 3DRap kit to obtain a short travel of the gas pedal,
- In the general menu allowing configuration, go to the calibration menu (here, by maneuvering your pedal you can see the acceleration level sent to the game),
- I think I defined a dead zone of 2 or 3% at the beginning of the travel if I ever had my foot in light support (my feet always stay very close to the pedals),
- Then I press the pedal fully, when I reach the stop, the clearance indicates that I am at 60% of the gauge. By saving this parameter, the game understands that I want 100% of the acceleration when I reach the stop.
It’s not more complicated than that and I recommend you to find the personal feeling that suits you best.
I did this because I found the original setting uncomfortable for my ankle. I also appreciate the fact of reaching 100% acceleration faster.
For the brake, I chose the hardest composition proposed in the Logitech manual with a force setting of 30.
In general, I attack the brakes very hard and I can achieve my degressive braking by slightly releasing the pressure.
Sorry, no capture possible, I am far from my rig during the week.
EDIT :
This is only valid for games that offer a calibration of your equipment.
For example, FH5 does not offer it so with my setup, I cannot reach a gas position at 100%.
Not a big deal because I was playing the pad for this title.
