Logitech Racing Force Feedback Wheel Problem

  • Thread starter Thread starter MLVD
  • 9 comments
  • 1,414 views
M

MLVD

Messages
13
Australia
Australia
I have a problem when attempting to use my Logitech Racing Force Feedback Wheel on Gran Turismo 5.

I need to turn the wheel to the left in order to keep straight. I don't think its an alignment issue as the wheel works fine on PC games and GT5 Prologue.
 
MLVD
I have a problem when attempting to use my Logitech Racing Force Feedback Wheel on Gran Turismo 5.

I need to turn the wheel to the left in order to keep straight. I don't think its an alignment issue as the wheel works fine on PC games and GT5 Prologue.
Click to expand...

Loose sensor on the back of the wheel maybe. Open up and tighten 4 screws that hold the sensor in place which could be under a black cover you need to remove first.
Never heard of that Logitech wheel though and I've been following them and using their products ever since their first wheel.
 
LogiForce
Loose sensor on the back of the wheel maybe. Open up and tighten 4 screws that hold the sensor in place which could be under a black cover you need to remove first.
Never heard of that Logitech wheel though and I've been following them and using their products ever since their first wheel.
Click to expand...

Is there a detailed guide I can have a look at?
The wheel is the one here http://www.logitech.com/en-au/441/320
 
I don't know if it's the same issue as I get with my driving force EX wheel but the solution for me is to turn the wheel fully in both directions before I race. This, presumably, allows GT5 to callibrate the wheel's turn properly as it doesn't spin it itself on start up like it does with a DFGT. Hope this helps.
 
LogiForce
Loose sensor on the back of the wheel maybe. Open up and tighten 4 screws that hold the sensor in place which could be under a black cover you need to remove first.
Never heard of that Logitech wheel though and I've been following them and using their products ever since their first wheel.
Click to expand...

Do you have any guides on how to do this as my g27 does the same thing.
 
jazzishouse
I don't know if it's the same issue as I get with my driving force EX wheel but the solution for me is to turn the wheel fully in both directions before I race. This, presumably, allows GT5 to callibrate the wheel's turn properly as it doesn't spin it itself on start up like it does with a DFGT. Hope this helps.
Click to expand...

Mine spins itself but when its done its to the left rather than center.
 
Glad to hear this isnt just me. I recently pulled mine apart to solder in a new paddle shift button my DFP wheel. Got the double shifting (or sometimes no shifting) issue fixed but my wheel is still off to the left some. The DFP and DFGT I believe are pretty similiar internally and I dont see any way to adjust any sensor or anything with those four screws as there is no movement in them. Unless the main casing needs pulled apart but like other said I had no issues on other games just GT5 here recently. I attached the pdf in a zip file that I used as a guide to replace the buttons if anyone wants to look. You can see the 4 screws just keep the wheel attached to a cylinder that feeds inside the main casing. Not sure if any soluton or not to be had
 

Attachments

SkateNj
Do you have any guides on how to do this as my g27 does the same thing.
Click to expand...

I send you a PM. Only just discovered you asked me here as well. Couldn't offer you any real guide though. :sick:
 

Latest Posts

Back