Logitech RS50 | Settings and tips

  • Thread starter Thread starter tinker
  • 301 comments
  • 60,101 views
LOGI_Rich
... yet. It's coming early next year.

If you're on console then you need to stick with same brand. There are third party adapters to enable connection of other shifters, but they are not reliable, support is spotty and by the time you've paid for one, that's money that you could be using for the new shifter...
Click to expand...
Awesome one is coming, I’ll just wait.
 
Hey guys
are there any Playstation Caps for the Hub buttons? I'll buy the rs50, hub and gt wheel sepparatly instead of the PS Bundle. But would like to put the Playstation caps
 
Last edited:
Hey guys, I'm deciding between the RS50 and DD Extreme and wanted to ask a couple things.

1) How do you like the standard RS pedals? Can someone compare them to TLCM? For some reason, the TLCM's add a massive deadzone on the top end in GT7 and I can't get rid of it. Do these work fine?

2) Not a huge fan of the wheels available for now, but any input on the GT3 rim?

Thanks a lot
 
Rash-182
Hey guys, I'm deciding between the RS50 and DD Extreme and wanted to ask a couple things.

1) How do you like the standard RS pedals? Can someone compare them to TLCM? For some reason, the TLCM's add a massive deadzone on the top end in GT7 and I can't get rid of it. Do these work fine?

2) Not a huge fan of the wheels available for now, but any input on the GT3 rim?

Thanks a lot
Click to expand...
Ich bin von den TLCM auf die G Pro Pedale umgestiegen, in Verbindung mit der RS50 Base. Und es war ein deutlicher Fortschritt. Ich habe ein besseres Gefühl. Bilde ich mir ein
 
I wanted to ask you if anyone has tried P.M.R after the update, if there have been improvements with the PS5, I have the opportunity to try in a few days.
 
IMG_0582.webp


Anyone try using this with the Logitech H shifter on this wheel? Or does the software hold it back?
 
Just got the RS50 and the pedals today! Won’t probably have the time to set it up anymore so I’ll be looking forward to tomorrow and share some impressions.
 
LOGI_Rich
... yet. It's coming early next year.

If you're on console then you need to stick with same brand. There are third party adapters to enable connection of other shifters, but they are not reliable, support is spotty and by the time you've paid for one, that's money that you could be using for the new shifter...
Click to expand...
I just ordered the PlayStation rs50 bundle, RS pedals, clutch pedal, shifter and adapter. Wish I had known about this. Is there a Logitech trade-in program for the shifter/adapter? 😆
 
black300zx
I just ordered the PlayStation rs50 bundle, RS pedals, clutch pedal, shifter and adapter. Wish I had known about this. Is there a Logitech trade-in program for the shifter/adapter? 😆
Click to expand...
I sold my entire 923 setup for 150, took 2 days. Ask around, I bet you can sling it
 
I might be weird but optimal ffb setup is:
Base: 8Nm, Filter 2, Dampen 12
GT: FFB Strength 8, Sensitivity 3
In Toyota GT-One TS020 it oscilates at around average 6.2 - 6.4Nm in turns, peaks at 7.2 to 8.6Nm (if i saw properly) BUT after 1.5h of constant driving on Suzuka base became hot to touch (around 60-65*C) but no Torque degradation yet. Going to test it with 3h of Nordschleife.
In road cars it works good too and base becomes loud only if you are crashing or masively overdriving the tyres
After owning T-GT II i am pretty hapy with RS50 bundle but throttle feels a bit too stiff and it is having a bit too long travel

Is your dial switch (rotating ones) Laggy and delayed?
 
Last edited:
LOGI_Rich
GT7 always sets whatever the in-game value is when it starts up, so you're better off just leaving the wheel strength (and TF Audio) at 8Nm/100 respectively and then the in-game values will be what you experience each and every time you start the game.

You can absolutely use a Mac, provided it's running OS 12 or later. The Mac version of G HUB is here. No need to be disturbed by it though - it's easy to calibrate.
Click to expand...
Hey Rich,

I've been using ps5 mode and haven't had any full drop outs from the wheel yet. However it still goes numb occasionally. Curbs end up losing their feeling. Is there a fix?
 
DC5Remy
I sold my entire 923 setup for 150, took 2 days. Ask around, I bet you can sling it
Click to expand...
Oh yes they’ll be going up for sale.

All joking aside, it should be arriving in two days just before Spec III. Very excited to try it out, currently have a t300rs gt edition, it’s served me well but think it’s the right time to try DD and load cell brake. T598 was considered but RS50 ticked all the boxes for me.
 
@LOGI_Rich Still getting used to the RS50, but I'm really liking it so far! Just two questions if you don't mind?

1) Can I use a regular USB-C to USB-C cable to connect the wheel to the front USB-C ports of the PS5 Pro? Or can I use an adapter without losing on anything? It's a bit cumbersome having to connect the wheel to the back of the PS every time.

2) Can the table clamp be used as a platform to lift the wheel and give it a little bit of an angle? I'm not loving how it's mounted on my wheel stand, that's why I'm asking :)

Thanks a lot
 
Last edited:
Zenmaster77
Thank you for the fast answer
I had already set the beginning deadzone in gt7 to 0% but nvm i just fixed it :D
I did it by connecting ONLY the pedals to my PC (not connected to RS50 base) and in Ghub i got the option at the bottom to "save on device". I did not have this option when the pedals were connected to the base. Now i have the settings and linearity i wanted on gt7
Click to expand...
This should honestly be pinned. I wasn't entirely happy with the gas pedal as it has too much travel for me, but raising the sensitivity helped a lot. @tinker

@LOGI_Rich Is this how it's supposed to work? I thought I was imagining things when I connected everything into my Mac and found that the linearity and sensitivity options for pedals weren't there.
 
Currently, yes. You can get the extra sliders when the pedals are connected to the base by switching to G HUB profile mode, but the ability the save to the device stall requires that the pedals are connected directly to the PC.
 
USB extension cables are always problematic. If you have to, then an active USB repeater cable is the route to go.
 
@LOGI_Rich
It appears that updating ghub and my RS50 is causing steamvr to crash with a nondescript critical error any time the wheel is turned on, once the wheel is turned off it works as normal.
This can be reproduced even without any vr headset being connected, turn on the wheel, start steamvr and watch it crash immediately.

I'm assuming that as usual there is no means of reverting firmware updates and thus i'm currently sitting on a brick, i've got no monitor on my rig.

Edit:
I've since seen a post by another vr user running a G920 with the same issue, so likely the ghub update and not the rs50 firmware.
In the meantime i have worked around the problem by using virtual desktops vdxr to cut steamvr out of the equation entirely, naturally this works fine if the game supports openxr.
 
Last edited:
Last edited:

Latest Posts

Back