Looking for a tuning sheet

[mustangxr]

Anyone know where to get a blank tuning sheet for jotting down tunes obtained from the forum?
Please let me know here, thanks
Mustangxr (Pete)

P.S. Merry Christmas

 

[CBH]

Something like this ?.

Name Of Car:

PP:
BHP:
WEIGHT:
WEIGHT DIST:
TIRE(S):

GT Auto:
Oil Change -
Rigidity Improvement -
Front Aero -
Wing - Custom Rear Wing- Wing Stays: Wing: Winglets:
Wing Size- Hieght: Width:
Flat Floor- Other -

SUSPENSION: Full Custom
RIDE HEIGHT -
SPRINGS -
COMP -
EXT -
ARB -
CAMBER:
TOE:
BRAKES: Racing
BRAKES -

TRANS:Full Custom (install all power upgrades first!)
FINAL TO -
TOP SPEED TO -
1ST -
2ND -
3RD -
4TH -
5TH -
6TH -
7TH -
FINAL -


LSD:Full Custom
INITIAL -
ACCEL -
DECEL -

CLUTCH TYPE: Triple- Plate: Installed
CARBON SHAFT: Installed


POWER PARTS:
ENGINE TUNING -
COMPUTER -
EXHAUST -
MANIFOLD -
CATALYTIC CONVERTER-
INTAKE TUNING -
SUPERCHARGER: TURBO -

POWER LIMITER -

WEIGHT REDUCTION-
CARBON BONNET -
WINDOW WEIGHT -

BALLAST WEIGHT: BALLAST POSTION:
DOWNFORCE - Front: Rear:

 

[demonchilde]

Name
PP=
Max power=
Weight=
F/R distribution=
Max torque=
P.T.W. Ratio=
Tire class=
_______________________
Aero Parts;
Aero kit= ¤
Flat floors= ¤
Rear wing= ¤
Custom wing= (large/small)
Custom wing H/W= ¤
Other Aero= ¤
_______________________
Wheels/Rims;
Size= (standard,+1,+2)
Name=
-------------------------------------
Pit Service;
Change oil= ¤
Improve Rigidity= ¤
_______________________
Paint;
Body= ¤
Wheels= ¤
Caliper= ¤
_______________________
Suspension; (front/rear)
Ride height= ___/___
SpringRate= ___/___
Dampers (C)= ___/___
Dampers (E)= ___/___
Anti-roll bars= ___/___
Camber Angle= ___/___
Toe Angle= ___/___
Brake settings= ___/___
_______________________
Transmission;
Final #= ___
Max speed#= ___
Gear (1)= ___
Gear (2)= ___
Gear (3)= ___
Gear (4)= ___
Gear (5)= ___
Gear (6)= ___
Gear (7)= ___
Final #= ___
_______________________
LSD (front/rear)
Initial Torque= ___/___
Acceleration= ___/___
Braking set.= ___/___

Torque-distributing Center
Differential (4wd only)= ___/___
_______________________
Parts;
Fully adjustable height suspension= Yes
Racing Brakes= Yes
Fully Custom Dog-clutch Transmission= Yes
Custom LSD= Yes
Triple-plate Clutch Kit= Yes
Carbon Drive Shaft= ?
Torque Distribution Center= n/a
-------------------------------------
Weight Reduction Windows= ?
Weight Reduction hood= ?
Weight Reduction Stage= (¤,1,2,3)
-------------------------------------
Power Options;
Engine Power Limiter = ¤%
Engine Stage= (0,1,2,3)
Sports Computer= ¤
Exhaust= ¤
Isometric Manifold= ¤
Catalytic Sports= ¤
Intake tuning= ¤
Turbocharger Stage= (0,1,2,3)
Nitrous= (yes/no)(%)
-------------------------------------
Weight adjustments;
Aero downforce front/rear= ___/___
Ballast weight= ___
Ballast Position= ___
_______________________
Final Comments;

 

[mustangxr]

Hall90,
That would probably do it, but the sheet I used to fill in was a full page of boxes for each value. Just the right size for an eight X 10 sheet from the printer. I got it off the tuning forum which has been changed quite a bit since I quit racing on GT-6.
Thanks for the above in any case. If anyone has the old sheet, please post it here for me please
Thanks, Pete

 

[CBH]

Hall90,
That would probably do it, but the sheet I used to fill in was a full page of boxes for each value. Just the right size for an eight X 10 sheet from the printer. I got it off the tuning forum which has been changed quite a bit since I quit racing on GT-6.
Thanks for the above in any case. If anyone has the old sheet, please post it here for me please
Thanks, Pete

Like the one for GT5 ?.

 

[Grippy]

You can use the resource forum/section, though all your tunes will be public and online. Otherwise Microsoft Excel(Spreadsheets) has the boxes and calcalculations