RSM 2.0 A New Beginning | Welcome Shiro |Black Label !

  • Thread starter Thread starter marbel69
  • 5,380 comments
  • 233,578 views
Status
Not open for further replies.
So we may be getting a credit card with a $10k limit. I might be allowed $4k for a new drift project. What should I get?
 
SPANK
So we may be getting a credit card with a $10k limit. I might be allowed $4k for a new drift project. What should I get?
Click to expand...

1JZ/20B S13.4 Lol.

Anyway being serious I think you should find a S-Chassis. Plus I would be jealous of you. :sly: Join XDC and do the event at Summit Point, I can ride along with you then. :)👍
 
Eric1512
1JZ/20B S13.4 Lol.

Anyway being serious I think you should find a S-Chassis. Plus I would be jealous of you. :sly: Join XDC and do the event at Summit Point, I can ride along with you then. :)👍
Click to expand...

S chassis with sr/rb/Vh swap?
 
Well good night guys. Did some VDC testing, and I must say I haven't felt more prepared for something. Funk is looking good in his Z4 tuned by Nar, DR is looking good in the BLTC Cobra R, Shadow is looking good in his BLTC S15, this will be a good season. Anyway see you all tomorrow night guys, keep practicing and we will do more tomorrow. If anyone else needs help tuning a car for VDC let me know, I know what I am doing. 👍

And Spank go with a RB 👍 Cya guys tomorrow! :drool:👍:sly::)
 
Eric1512
1JZ/20B S13.4 Lol.
Click to expand...

Lol why 20B? I'd just get a S13 Silvia (Coupe) or a 240sx coupe (Onevia) shell, and run a SR20DET under a $4k budget.

KA24DE isn't bad either, my friend has a 300hp KA24 RPS13, small turbo and it only costed him about $1.5k.
 
This will be a missile so nothing fancy.
 
DriftMissle
Lol why 20B? I'd just get a S13 Silvia (Coupe) or a 240sx coupe (Onevia) shell, and run a SR20DET under a $4k budget.

KA24DE isn't bad either, my friend has a 300hp KA24 RPS13, small turbo and it only costed him about $1.5k.
Click to expand...

That is my dream car. A rotary s13 would be amazing. But yeah go with a KA or SR. If you have the money or something shows up cheap go RB. I am starting a job soon doing oil changes, so soon I might have a car of my own. Being RSM into reality? That would be awesome!
 
Spank i still have alot of my KA-T stuff. Like intake manifold, fuel rail 660cc rc injectors, custom tunex length top mount manifold, Gt3530r, down pipe. Thos setup made 315rwhp and 14lbs and made peak boost around 2400.
 
hey guys, i finished my c63 today , after 7 hours of work LOL , iff anybody wants a kopie off it let me know it looks veryvery good , i hope i will see you guys soon , cause for some reason i was online all by myself the last 5 days or something , yesterday i joined a puerto rico handa drag lounge and a normal honda drag lounge, there was only one guy who beated my DC5, so yea i had fun
 
marbel69
hey guys, i finished my c63 today , after 7 hours of work LOL , iff anybody wants a kopie off it let me know it looks veryvery good , i hope i will see you guys soon , cause for some reason i was online all by myself the last 5 days or something , yesterday i joined a puerto rico handa drag lounge and a normal honda drag lounge, there was only one guy who beated my DC5, so yea i had fun
Click to expand...

I have been on but only seen shadow online :(.
Eric you can tune my 300zx if you want . I had it feeling good but didn't realise I had it at 500bhp and not 450. At 450 it lacks power I think it needs the transmission tuning but I'm no good at tuning the transmission. If you can help that would be great.
 
Last edited:
Reddee
I have been on but only seen shadow online :(.
Eric you can tune my 300zx if you want . I had it feeling good but didn't realise I had it at 500bhp and not 450. At 450 it lacks power I think it needs the transmission tuning but I'm no good at tuning the transmission. If you can help that would be great.
Click to expand...

That transmission

Put the top speed at 217
Then put final gear at about 1/8th over half way between to the right. (sorry don't have exact numbers).

Then adjust top speed up one click and down one click back to 217

Then adjust gears 1st and 2nd will be all the way to the left.
3rd a line or two before half way then.
4th about 3 lines above half way.
5th about 3 lines before all the way up
6th all the way up.

If you have gear lag let me know what gear and I'll tell you what to do.
If you feel too much top speed adjust final gear to the right accordingly. If you have too much acceleration move it to the left accordingly
 
Anyone have any extra silver chromes?
 
marbel69
hey guys, i finished my c63 today , after 7 hours of work LOL , iff anybody wants a kopie off it let me know it looks veryvery good , i hope i will see you guys soon , cause for some reason i was online all by myself the last 5 days or something , yesterday i joined a puerto rico handa drag lounge and a normal honda drag lounge, there was only one guy who beated my DC5, so yea i had fun
Click to expand...

School ruins everything...

Reddee
I have been on but only seen shadow online :(.
Eric you can tune my 300zx if you want . I had it feeling good but didn't realise I had it at 500bhp and not 450. At 450 it lacks power I think it needs the transmission tuning but I'm no good at tuning the transmission. If you can help that would be great.
Click to expand...

Yeah I can help tune it bro, I am looking at 10 drivers for BLTC, spaces are filling up quick!

ProdigyDR
Anyone have any extra silver chromes?
Click to expand...
We need to get some and start duping it. 👍

RSM-RB
RSM-5andDime
RSM-GoPro
RSM-xPacMan
RSM-GonE

These people I have not seen lately and I have heard nothing from them. No response by the new year I am afraid we will kick them. I have many good people looking for a team and no space in RSM. I will send a message out to them tonight and see what they say. We will have a team meeting sometime this weekend if I am not busy.

And move RSM-Maccer to the touge team. He is not really doing drifting anymore.
 
marbel69
hey guys, i finished my c63 today , after 7 hours of work LOL , iff anybody wants a kopie off it let me know it looks veryvery good , i hope i will see you guys soon , cause for some reason i was online all by myself the last 5 days or something , yesterday i joined a puerto rico handa drag lounge and a normal honda drag lounge, there was only one guy who beated my DC5, so yea i had fun
Click to expand...

I'll beat it >:3 (DC5)
 
good news guys i may buy a g27 next week :D
 
funkthehype
good news guys i may buy a g27 next week :D
Click to expand...

Lucky!

I still need an adapter for the dfgt to install a real deep dish on it.
 
funkthehype
good news guys i may buy a g27 next week :D
Click to expand...

Heck yeah... I can't wait till Christmas omg you don't even know
 
Im about to sell my DFGT, i bought it about a year ago and used it a couple times then put it in the closet. Its been in there ever since.
 
xXShadowXx
8th just dont ... Times changed ...
Click to expand...

Enough off topic guys. Take it to the track, not the RSM forum.
 
SPANK
Lucky!

I still need an adapter for the dfgt to install a real deep dish on it.
Click to expand...

I need help with creating/finding a new adapter for it. Do you know how to make or where to buy one?
 
News from MAV ?!!..
 
DriftMissle
I need help with creating/finding a new adapter for it. Do you know how to make or where to buy one?
Click to expand...

No I need to learn that as well
 
Asa27
News from MAV ?!!..
Click to expand...

I actually just got done texting him. He is going out to eat or something right now.
 
Status
Not open for further replies.
Back