Show off your customized cars!

  • Thread starter Thread starter hejustsits
  • 2,313 comments
  • 447,168 views
I love how the exhausts for the E30 M3 vary so much for each stage. Semi-Racing is a twin titanium tip but I don't have a third M3 yet

20829963849618850.jpg
 
Here are a few liveries I've done recently. The RCZ, Vette and NSX were made in Sport and transferred over with some minor tweaks to perfect them in 7.

The Vette was modeled after the IMSA GTO C4 Corvette race car, the NSX is a made up livery based loosely on the the TAKATA Dome JGTC GT500 NSX, the RCZ is a livery that pays tribute to the French heritage of Peugeot, and the Miata is a scheme I did to play with transparency over a metallic base.

88-chevy-corvette-num88_dv-18-mh-05.jpg


IMG_1340.jpg


IMG_1342.jpg


IMG_1343.jpg


IMG_1345.jpg


IMG_1346.jpg


IMG_1348.jpg



I have just as much fun customizing cars and making liveries in the game as I do the driving aspects. Though many others are much more proficient at making amazing liveries, I always prefer to make my own as opposed to using something that someone else made. I hope they seem half as impressive as some of the spectacular work I've seen from others here!

Now I need to get off my butt and find and use a better method than taking a picture of my TV screen to get them on here. They definitely do not have the same impact as they would if it were a transferred file. Hopefully they don't look too bad!

I also haven't found a way to place winglet decals without them skewing across the bottom or top of the wing, so if anyone had any tips in that aspect it would be much appreciated!
 
Last edited:
LSFDRX
Here are a few liveries I've done recently. The RCZ, Vette and NSX were made in Sport and transferred over with some minor tweaks to perfect them in 7.

The Vette was modeled after the IMSA GTO C4 Corvette race car, the NSX is a made up livery based loosely on the the TAKATA Dome JGTC GT500 NSX, the RCZ is a livery that pays tribute to the French heritage of Peugeot, and the Miata is a scheme I did to play with transparency over a metallic base.

View attachment 1144819

View attachment 1144820

View attachment 1144821

View attachment 1144822

View attachment 1144823

View attachment 1144824

View attachment 1144825


I have just as much fun customizing cars and making liveries in the game as I do the driving aspects. Though many others are much more proficient at making amazing liveries, I always prefer to make my own as opposed to using something that someone else made. I hope they seem half as impressive as some of the spectacular work I've seen from others here!

Now I need to get off my butt and find and use a better method than taking a picture of my TV screen to get them on here. They definitely do not have the same impact as they would if it were a transferred file. Hopefully they don't look too bad!

I also haven't found a way to place winglet decals without them skewing across the bottom or top of the wing, so if anyone had any tips in that aspect it would be much appreciated!
Click to expand...
For the decals on the winglets (I’m assuming you’re talking about the end plates on the rear wing?) you need to adjust the projection and depth settings. This will stop parts of the decal appearing on the top and bottom of the main wing.

I really like that MX5 livery. Is it available in the showcase?
 
LSFDRX
Here are a few liveries I've done recently. The RCZ, Vette and NSX were made in Sport and transferred over with some minor tweaks to perfect them in 7.

The Vette was modeled after the IMSA GTO C4 Corvette race car, the NSX is a made up livery based loosely on the the TAKATA Dome JGTC GT500 NSX, the RCZ is a livery that pays tribute to the French heritage of Peugeot, and the Miata is a scheme I did to play with transparency over a metallic base.

View attachment 1144819

View attachment 1144820

View attachment 1144821

View attachment 1144822

View attachment 1144823

View attachment 1144824

View attachment 1144825


I have just as much fun customizing cars and making liveries in the game as I do the driving aspects. Though many others are much more proficient at making amazing liveries, I always prefer to make my own as opposed to using something that someone else made. I hope they seem half as impressive as some of the spectacular work I've seen from others here!

Now I need to get off my butt and find and use a better method than taking a picture of my TV screen to get them on here. They definitely do not have the same impact as they would if it were a transferred file. Hopefully they don't look too bad!

I also haven't found a way to place winglet decals without them skewing across the bottom or top of the wing, so if anyone had any tips in that aspect it would be much appreciated
Click to expand...

LSFDRX
Here are a few liveries I've done recently. The RCZ, Vette and NSX were made in Sport and transferred over with some minor tweaks to perfect them in 7.

The Vette was modeled after the IMSA GTO C4 Corvette race car, the NSX is a made up livery based loosely on the the TAKATA Dome JGTC GT500 NSX, the RCZ is a livery that pays tribute to the French heritage of Peugeot, and the Miata is a scheme I did to play with transparency over a metallic base.

View attachment 1144819

View attachment 1144820

View attachment 1144821

View attachment 1144822

View attachment 1144823

View attachment 1144824

View attachment 1144825


I have just as much fun customizing cars and making liveries in the game as I do the driving aspects. Though many others are much more proficient at making amazing liveries, I always prefer to make my own as opposed to using something that someone else made. I hope they seem half as impressive as some of the spectacular work I've seen from others here!

Now I need to get off my butt and find and use a better method than taking a picture of my TV screen to get them on here. They definitely do not have the same impact as they would if it were a transferred file. Hopefully they don't look too bad!

I also haven't found a way to place winglet decals without them skewing across the bottom or top of the wing, so if anyone had any tips in that aspect it would be much appreciated!
Click to expand...
THAT MIATA IS GORGEOUS!!!!!!!!!
 
YoungGuns
For the decals on the winglets (I’m assuming you’re talking about the end plates on the rear wing?) you need to adjust the projection and depth settings. This will stop parts of the decal appearing on the top and bottom of the main wing.

I really like that MX5 livery. Is it available in the showcase?
Click to expand...
Awesome! Thanks for that, now I can go and finish them with some more details. I'm not sure if they are available, but I will make them so today. It's just uploading them, right?
3WIDECLEAR
THAT MIATA IS GORGEOUS!!!!!!!!!
Click to expand...
Thanks! I had fun with it for sure. I'll make it available today if anyone wants to use it. Fair warning, there are small pride rainbows ahead of the side numbers and on the rear bumpers of most of the liveries, so if anyone wants to use them, feel free to remove those if you want. If not, of course that's cool too!

Glad you guys like them!
 
LSFDRX
Awesome! Thanks for that, now I can go and finish them with some more details. I'm not sure if they are available, but I will make them so today. It's just uploading them, right?

Thanks! I had fun with it for sure. I'll make it available today if anyone wants to use it. Fair warning, there are small pride rainbows ahead of the side numbers and on the rear bumpers of most of the liveries, so if anyone wants to use them, feel free to remove those if you want. If not, of course that's cool too!

Glad you guys like them!
Click to expand...
For uploading the livery, when you save it in GT Auto it should give you the option to share, which will then publish it to the online GT7 showcase.

You might need to save it again with a new name if you already have it saved and skipped this option last time.
 
Last edited:
YoungGuns
For uploading the livery, when you save it in GT Auto it should give you the option to share, which will then publish it to the online GT7 showcase.

You might need to save it again with a new name if you already have it saved and skipped this option last time.
Click to expand...
Thanks! I was able to share them by saving the style, then going into my collection and sharing them from there. I made some tweaks to each of them with some end decals and removing the RAYS logo from the Miata a replacing it with a Yokohama logo becuase I forgot I changed from RAYS to Advans... lol

Search my username LSFDRX and the RCZ, Corvette, NSX, and Miata are all there and open to modification. Have fun!
 
Back