Reply to thread

Message: [QUOTE="The_rymeister, post: 13506095, member: 321203"] Hi yes I grounded my rig and have no issues at all since. so I purchased a 6 terminal bus bar and an earthing plug from Amazon, (I’ll leave links at bottom of it allows me) then used 14/0.30mm strand wire (so not huge at all) and crimped ring terminals on the ends. Then I ran the lengths of wire from one of the fixing bolts on the wheel base, 2 wired from the pedal fixing bolts, I also rubbed of the paint of a small section of the aluminium rig and clamped one wire on there. Then run them all to the terminal bus bar. Then run a length of wire to the earth plug and plugged in wall. Hope this helps. I’ve had no issues whatsoever since and I’m running my rig in carpet which I’m told you cannot . Any questions drop me a message, happy to help 👍 ULTECHNOVO 6 Terminal Bus Bar 150A Bus Bar Block Cover Ground Distribution Terminal Block Heat Shrink Ring Terminals for Car Boat Marine Caravan RV (Assorted) [MEDIA=amazon]id=B08LVSFJBQ;tld=uk[/MEDIA] ELIMISTAT® Anti-Static ESD Grounding Plug UK - 1 x 10mm stud, 2 x M5 Post Connections [MEDIA=amazon]id=B00EWODW3M;tld=uk[/MEDIA] [/QUOTE]