Reply to thread

Message: [QUOTE="realist7, post: 13683780, member: 329776"] Hello mate did this solve your issue or did you find a fix for this issue. Because I’m having an issue where the raw values of my throttle flicker around 0.6-0.7 by default even when I’m not pressing the pedal. The raw values are lower after the pedals haven’t been used for example so I think it is also a grounding issue. When I opened my pedals I also noticed some grey grease on top of the grounding pins underneath the pedal which I think is the grease they use on the rod which keeps the pedal in place. I think it has not been applied cleanly and some has gone onto the top of the grounding pins on the circuit board which are supposed to make clean contact with the aluminium pedal. I wasn’t sure if this grease was meant to be there on the pins or not so I did not clean it off. But now I’m thinking maybe this is causing the issue. Either the grease on the grounding shield pins or maybe that the pins Are not making solid contact with the pedal when it’s not pressed and need to be bent slightly to make better contact with the underside of the aluminium pedal. Would be interesting to know how your testing went and if you manage to clean off that grease or figure out a solution. Regards. [/QUOTE]