The Biggest, Baddest Hybrids!

  • Thread starter Thread starter frentzey
  • 121 comments
  • 9,275 views
Messages
283
Yes, at last I have a sharkport and I can do the heavenly hybrids! I've only done a few beasts in the past hour, here are a few...

1. BMW 328i - 4230 hp - F094/s engine with a skyline stage 4 turbo I think - somehow it has F1 tires that fit perfectly, they stick right out and look sooo bad! It hits 370 mph easily, then the gearbox maxes out! Does anyone know of a car with a really tall gearbox? It can go much faster! :D

2. Renault Clio Sport - 3120 hp - It is a monster on the rallies, on tahiti reverse you can hit the last jump on the long straight, fly a long distance, bounce off the ground, and smash into the wall while in the air :eek: !

3. 1530 hp Mini - Zonda Engine with a Lancer VII turbo level 4 - It's actually quite drivable in most conditions, I've been winning a lot with this car. It can go up to 280, it actually think that I've tweaked it to be better than an F1, but starts are crap with FF...

Anyone else have some monsters they want to submit? :burnout:
 
hopefully, I can get a sharkport today, then I will make the following:
RX-8 A-Spec- probably just ad the stage 2 turbo off of the Miata
Rotory Miata(was actually a concept car) with the Renisis Rotory(if you have no clue what I'm talking about, it's the RX-8 engine)
Demio All-Sport, big dirt tires, 4wd, v6 turbo of FI car, suspension off of Celica Rally, should do good.
4 rotor RX-7
787B with RX-7 LM engine, stage 4 turbo of RX-7 RS


that's it for now, got to get ready to pick up the SP!
 
Sir, those are girls cars. I have a Toms chaser with 4920 bhp, and an MR2 with 4700bhp, that will do 461.3mph on the high speed machine test with no wheelie cheats.
 
well, this seems to be pointing more towards gt3, but im just gonna say...

i had a 64012hp NSX in GT2.. :D

Fun fun!! VERY hard to drive though... especially when you hit abot 500 and it rockets you backwards at speeds up to 630mph.. man, that was frikin amazin'!
 
Well, I made this:
2000 Miata LS- Renisis engine, RX-8 rims(just a tad too big, they went through the wheel wells)and all normal parts. 592HP, 235MPH

And then I was going to make more cars, RX-7 RS with the 787B(the name of the car is the engine)and 787B front wheels for all 4.
And I fixed my Miata by putting Mugen S2000 front wheels on all 4 and the Viper concept NA. And then I made a Rally Demio, Celice rally chassis(I guessed that it was the 4wd I needed), suspension, wheels, and F0/90s engine.

And that's where I had a problem. It locked up when I went into the garage. I backtracked, and switched the parts I thought it could be, but no luck. Looks like I'll have to start from scratch. :(
 
Originally posted by Mekon
Sir, those are girls cars. I have a Toms chaser with 4920 bhp, and an MR2 with 4700bhp, that will do 461.3mph on the high speed machine test with no wheelie cheats.
Lmao! I hate when people say they got the "baddest" hybrids. Use to see it all the time in GT2. Anywho, to my knowledge i think Mekon's got the "baddest" or "biggest" anyway.
 
Well, I fixed my corrupted save, and now I have:
SLK-V12 from S-class, all other parts are normaly bought parts for SLK, 770 HP, 1005ft.Lbs
Problems:Supercharger bost drops to 0 at high RPM, and the car slows acceleration rate.

RX-7 RS, Gold matallic, 787B, all other parts are nomally bought RX-7 parts, 1761 HP, 1462ft. Lbs. Speed as tested:325MPH
Problems:get's going slow at low RPM
This car flies! in 3rd, you floor it and it gets going, and at 6500RPM it just screams......literaly!

I'm going to fix the SLK, and start on project Cl/NSX(NSX V6 in CL), Project Miata/Renisis(this time I'm going to add a supercharger, Muffler off of RX-7), and project Del Sol/S2000.

This is fun!
 
Mostly, I keep my hybrids in the 400-700hp range (unless the car is overweight). But I made a GT2 hybrid with all sorts of ridiculousness:
Bought: Subaru Pleo RM '98

Added:
Skyline GT-R Stage 4 turbo
Vette Grand Sport NA Stage 3
ROM chip from Civic Type R
Port and Polish from Viper, flywheel too
Muffler from Skyline GT-R
Balancing from 3000GT MR
Added max downforce
Unisia Jecs Skyline drivetrain
Changed the body to an RX-7
Added car width code
Silvia tires

I had 3600hp without using the HP multiplier code. Guess what? It's nearly impossible to drive in a straight line, and did hit 379mph at the test track. It gets a nice surge of speed around 280-290 mph, which feels like hitting Warp 9! It's also noisy as all hell. I hit 542mph with a 5x multiplier and the car was even less stable and more noisy (hit mute, please).

Since I don't have any way to change the AI cars (old GS)...making super-powerful hybrids doesn't hold that much interest to me.
 
If you export the car to a text file you can change you final drive,,, maybe,,, I am at work and can't test it right now.In the text file for the car the line you need to change is #272 and maybe line # 428 both of them have a value stored there for the final drive.
Change them in the text file save it and import the car with the changes and give it a try.
Line#276 Auto gear
Line#244 1st gear
Line#248 2nd gear
Line#252 3rd gear
Line#256 4th gear
Line#260 5th gear
Line#264 6th gear
Line#268 7th gear but I still have not been able to make 7th work.
Line#476 travel meter for setting you mileage back to 0 miles
Line#480 oil #1
Line#484 oil #2
Line#292 front downforce
Line#296 rear downforce
Change downforce to 256 and you will have max (DF) it's allways one less then what you put in.
Line#332 front ride height
Line#336 rear ride height

Here is a 2000hp+ 4wheel drive 911 thats runs Midfield in the 43's and the Super Speedway in the 19's.Just copy and paste it to a text file and then inport it to MK's Hybrid progam.

Did you know he has updated it again and it now has hop up parts form all the cars working?

[GT3CarData]
Region=US
BaseFile= _996_gt3
BaseName= 911(996) GT3
0=-1811544630
4=-1958667724
8=-207
12=-1
16=-1
20=-1
24=-1557655762
28=-423337270
32=-12514
36=-1
40=-1026345307
44=-1960776462
48=1686067058
52=-1596695059
56=158873316
60=-1609951638
64=-623692123
68=-1960776990
72=1523791525
76=-1960791374
80=-358311889
84=1183655133
88=990245871
92=-1633435415
96=990245868
100=-1734098711
104=-2619186
108=-1
112=-684214039
116=691232794
120=-364554193
124=1183655133
128=-948979477
132=691232804
136=-203441941
140=691232854
144=-145245973
148=691232822
152=-76039957
156=691232832
160=-1
164=-1
168=-1214793495
172=691232802
176=-1
180=-1
184=-1563216219
188=-1960778510
192=-1
196=-1
200=-750274327
204=691232796
208=-1
212=-1
216=-12514
220=-1
224=-12514
228=-1
232=-101527546
236=1261716548
240=-3539
244=-3390
248=-2245
252=-1639
256=-1232
260=-985
264=-776
268=-64538
272=-2884
276=-39
280=-11
284=-10
288=-10
292=-186
296=-201
300=-9
304=-41
308=-96
312=-1
316=-1
320=-1
324=-21
328=-11
332=-66
336=-66
340=-128
344=-129
348=-151
352=-161
356=-91
360=-91
364=-8
368=-8
372=-6
376=-6
380=-8
384=-8
388=-6
392=-6
396=-6
400=-6
404=-1
408=-1
412=-1
416=-1
420=-1
424=-1
428=-3344
432=-9
436=-1
440=-1
444=-3
448=-2
452=-2
456=-2
460=-1
464=-2089348886
468=-21311889
472=-2637833
476=-1
480=-1
484=-1
488=-1061997774
492=-1
496=-1
500=-1
504=-1
508=-2

I set the mileage back to 0 so give it a oil change for some more HP and have fun!
 
Well, I'm movin on up in hybrids, now I got:
3320hp NSX, Esporante engine, Suzuki Alto works Turbo(boost is 280%, Skyline is only 235%), Mini displacement, some other stuff. Gonna put NA on it with the turbo. I decided to ditch the F1 engine, not enough power at RPMs lower than 12,000, so gearing it for really high speeds is not possible. I've gotten the car up to 417, but that was topped out and didn't work too well. Now it goes 400, gonna make it faster thought. What are some good ROM/Polish/Balance parts? I took them off of the Esprit and put it on the Miata, and it made it slower.

And can you edit the ride hieght and stuff? I'm makeing a rally Demio, 4wd, but the ride hight is still really low.
 
I got a Nismo 400R with 7,354hp and ran 465mph at test course with non adjustable DF and the regular T8 tires.(no .ini edits)

MazKid, yes you can edit all settings on the .ini file.
 
Originally posted by too cold

MazKid, yes you can edit all settings on the .ini file.

You mean in the program? I tryed but couldn't figure out how....it kept on changing back to what it was.

And I just got done working on my cars, so now I have a Rally Demio(still have to get the rally tires for it):Has Focus Rally suspension with ride hieght 250, Lancia Stratos tires(they have bigger tires, rather than huge wheels, and they look good. I'll take a pic in a bit.

I put the 13B in the Mini(normal Mini engine is a 1.3, 13B is a 1.3)840HP, got up to 245 so far, still working on settings.

And my NSX is now a 440+ MPH car, 4336HP, peels the tires at 240MPH(non burnout, just flooring it in 4th)

Got some other cars, nothing too special...
 
Here's the Demio Rally Edition:

sorry about the bad quality, had to fit it within limits.
 

Attachments

  • demiorally.jpg
    demiorally.jpg
    21.8 KB · Views: 736
You mean in the program? I tryed but couldn't figure out how....it kept on changing back to what it was.

No, ya have to export the car, then open the .ini or car file with note pad then edit the numbers, save, then import it back to the program.
That Demio looks good man!
 
Originally posted by too cold


No, ya have to export the car, then open the .ini or car file with note pad then edit the numbers, save, then import it back to the program.
That Demio looks good man!

Ohh, I see.

And for some unknown reason, in the garage, the Demio is black, when I race it's silver, but it has this part on the back that changes hue.....it's the angled part inbetween the tail lights.
 
Hey Too cold, post up the setting for the Nismo would you, I've peaked at 4920bhp, and would love to know where you got the extra bhp from.

BTW, was that High Speed set in the High Speed test mode? I've gone just shy of 470mph in free run, but 461.3 is the fastest I've gone in on the test.
 
Hey Mekon,
I did it in free run, so ya still got me beat. I posted the hp parts in the record thread at the house. ;)
 
OK, I see what the #s mean, but what lines are the Spring rate? I want my demio to be really soft, but Viper didn't list the other code lines.
 
Originally posted by MazKid
OK, I see what the #s mean, but what lines are the Spring rate? I want my demio to be really soft, but Viper didn't list the other code lines.
Hey Maz,
Have your car open in the program and the .ini file so you can compare the numbers. I'm pretty sure these are springs.
348=-151
352=-161
 
Originally posted by too cold

Hey Maz,
Have your car open in the program and the .ini file so you can compare the numbers. I'm pretty sure these are springs.
348=-151
352=-161

I found the right ones. I set the spring rate to .1, big no no, it leaned and didn't return to level for a while, so I got it at .5
 
Does anyone have a desire to create a template file that will describe each line in the .ini files?

Also maybe define what type of ranges they can be.
 
Yes..someone PLEASE create a template file for the *.ini's.....
I cant figure out how to use the Power Multiplyer either....any help?

BTW, i got v4, if that means anything
 
just export your car and open it in notepad and go to line 440. then manipulate it by 2 to the nth power, with n as a whole number. Make sure to keep it negative. It gets crazy though, my diablo has 490,000hp. It spins wheels at all rpms, all speeds.
 
OK, you owe Tangoman a 6 pack for making it, and me a 6 for delivery. Also the creator of the hp modify was PRKing.

[GT3CarData]
Region=US
BaseFile= 4
BaseName= GT40 Race Car
0=-2100615252 \Car Base Part 1
4=-817875727 /Car Base Part 2
8=-1131 \Color Part 1
12=-1 /Color Part 2
16=-2 \4 ?? Part 1
20=-1 /4 ?? Part 2
24=-907344916 \Brakes Part 1
28=265915218 /Brakes Part 2
32=-12514 \Brake Controllor Part 1
36=-1 /Brake Controllor Part 2
40=-907344916 \Chassis Part 1
44=341352274 /Chassis Part 2
48=1686067058 \Engine Part 1
52=-1596695059 /Engine Part 2
56=-1643198613 \Drivetrain & VCD Part 1
60=1721000207 /Drivetrain & VCD Part 1
64=-329779156 \Transmission Part 1
68=340152146 /Transmission Part 2
72=-907344916 \Suspension Part 1
76=97027410 /Suspension Part 2
80=-907344916 \LSD Part 1
84=172984658 /LSD Part 1
88=-907344924 \Front Tyres Part 1
92=148211538 /Front Tyres Part 2
96=-907344924 \Rear Tyres Part 1
100=46761810 /Raer Tyres Part 2
104=-2619186 \17 ?? Part 1
108=-1 /17 ?? Part 2
112=-1 \Weight Reduction Part 1
116=-1 /Weight Reduction Part 2
120=-907344916 \Body & DF Part 1
124=172594514 /Body & DF Part 2
128=-948979477 \Polish Part 1
132=691232804 /Polish Part 2
136=152590897 \Balance Part 1
140=1530813115 /Balance Part 2
144=-145245973 \Displacement part 1
148=691232822 /Displacement part 2
152=152545902 \Computer Part 1
156=457071291 /Computer Part
160=-933989651 \N\A Tune Part 1
164=404172409 /N\A Tune Part 2
168=-1214793495 \Turbo Part 1
172=691232802 /Turbo Part 2
176=-1 \Flywheel Part 1
180=-1 /Flywheel Part 2
184=-907344916 \Clutch Part 1
188=307795794 /Clutch Part 2
192=-1 \Shaft Part 1
196=-1 /Shaft Part 2
200=-907344916 \Muffler Part 1
204=147752274 /Muffler Part 2
208=598169207 \Intercooler Part 1
212=1801572653 /Intercooler Part 2
216=-12514 \??ASM?? Part 1
220=-1 /??ASM?? Part 2
224=-12514 \??TCS?? Part 1
228=-1 /??TCS?? Part 2
232=-1 \Wheels Part 1
236=-1 /Wheels Part 2
240=-5352 >R Gear
244=-5891 >1 Gear
248=-3817 >2 Gear
252=-2719 >3 Gear
256=-2041 >4 Gear
260=-1614 >5 Gear
264=-1201 >6 Gear
268=-1 >7 Gear
272=-2001 >Final Drive
276=-43 >Auto Gear
280=-1 >VCD
284=-2 \Front Brakes Part 1
288=-2 /Front Brakes Part 2
292=-186 >Front DF
296=-209 >Rear DF
300=-7 >Turbo 1
304=-41 >Turbo 2
308=-106 >Turbo 3
312=-1 >Turbo 4
316=-1 >Turbo 5
320=-1 >Turbo 6
324=-21 >Front Camber
328=-11 >Rear Camger
332=-36 >Front Ride Height
336=-36 >Rear Ride Height
340=-129 >Front Toe
344=-129 >Rear Toe
348=-109 >Front Springs
352=-126 >Rear Springs
356=-76 >??Front Grip??
360=-91 >??Rear Grip??
364=-8 >Front Bound
368=-8 >Front Bound
372=-8 >Front Rebound
376=-8 >Front Rebound
380=-8 >Rear Bound
384=-8 >Rear Bound
388=-8 >Rear Rebound
392=-8 >Rear Rebound
396=-8 >Front Stabilizer
400=-8 >Rear Stabilizer
404=-1 >Front LSD Init
408=-11 >Rear LSD Init
412=-1 >Front LSD Accel
416=-41 >Rear LSD Accel
420=-1 >Front LSD Decel
424=-21 >Rear LSD Decel
428=-2001 >Final Drive
432=-10 >TCS
436=-1 >84
440=-1 >85 > horse power modifier
444=-7 >ASM
448=-2 >??Driver A/MT??
452=-2 >??Driver ASM??
456=-2 >??Driver TCS??
460=-1 >90
464=-71345546 >Fittment 1
468=-610409861 >Fittment 2
472=-2640162 >Fittment 3
476=-1 >Travel Meter
480=-1211699450 >Oil 1
484=930364638 >Oil 2
488=-1034224036 >97 shine of car
492=-1 >98
496=-1 >99
500=-1 >100
504=-1 >101
 
TC, what does the part 1 and part 2 mean? Have you tried changing those? Same with the wheels. Maybe we can switch normal wheels...
 
Also, do we have any way of determining what valid ranges are for these numbers? I mean, what does -129 in Front Toe even mean?
 
Maz,
The parts seem to be made up of 32bit values. So brakes in program mustang = 8B98 F89A DA45 0114
part#1=8B98 F89A
part#2=DA45 0114
.ini
part#1=24=-1694984053
part#2=28=335627738
and no, i've done nothing with trying to edit these part values.
AltF8,
For settings it's not to tuff. The -129 = 0.0 settings, that one is a bit strange but look at
324=-21 >Front Camber (2.0 in setts)
328=-11 >Rear Camber (1.0 in setts)
332=-36 >Front Ride Height (35mm setts)
336=-36 >Rear Ride Height (ditto)
340=-129 >Front Toe (0.0)
344=-129 >Rear Toe (0.0)
348=-109 >Front Springs (10.8)
352=-126 >Rear Springs (12.5)
Really theres a couple things I do in .ini and thats df, grip,height and gears. oh yeah car shine also. But what i've started doing recently is when i got a good set up, i'll copy and paste the setts(.ini lines 240 to 432, except the turbo lines) and this works as a pretty good starting point when building a new car.
 

Latest Posts

Back