TV slightly too low, cheap fixes?

  • Thread starter Thread starter Bonneville120
  • 7 comments
  • 268 views
Messages
69
United Kingdom
United Kingdom
65 inch TV
Playseat Trophy
RS50.

I've dialled in the Trophy so it feels very comfortable now and the wheel is in the ideal placement. The problem now is that the wheel rim blocks part of my view of the screen (more so than the photo suggests), which as a GT7 player is very annoying as I can't see parts of the HUD. This is a bit of a limitation of the Trophy as seat height can't be raised up or down. I've tried adjusting the seat to make myself look over the wheel but it puts way too much pressure on my lower back. The TV cabinet is 46cm in height.
There are a few solutions I've thought about, but ideally want something permanent and presentable:
Furniture riser blocks under the feet of the TV and/or the tv cabinet
New TV cabinet
New TV riser stand
Permanently raise the rear of the Trophy somehow
Sit on a cushion (not ideal)

As a test I did sit on a cushion about 5 inches thick and it solved the problem completely, but it wasn't comfortable after a while. It does show how close to ideal the setup already is though.
Thanks
IMG_20260731_214344968.webp
 

Attachments

  • IMG_20260731_185538507 (1).webp
    IMG_20260731_185538507 (1).webp
    31.8 KB · Views: 1
65 inch TV
Playseat Trophy
RS50.

I've dialled in the Trophy so it feels very comfortable now and the wheel is in the ideal placement. The problem now is that the wheel rim blocks part of my view of the screen (more so than the photo suggests), which as a GT7 player is very annoying as I can't see parts of the HUD. This is a bit of a limitation of the Trophy as seat height can't be raised up or down. I've tried adjusting the seat to make myself look over the wheel but it puts way too much pressure on my lower back. The TV cabinet is 46cm in height.
There are a few solutions I've thought about, but ideally want something permanent and presentable:
Furniture riser blocks under the feet of the TV and/or the tv cabinet
New TV cabinet
New TV riser stand
Permanently raise the rear of the Trophy somehow
Sit on a cushion (not ideal)

As a test I did sit on a cushion about 5 inches thick and it solved the problem completely, but it wasn't comfortable after a while. It does show how close to ideal the setup already is though.
Thanks
View attachment 1554673
Small plastic boxes underneath each set of TV legs should fix that... but you will have to be a bit innovative to make them blend in.

Other than that you could lower your seat without altering the position if possible, but I can't tell how your seat setup works without a photo of that
 
Last edited:
The general consensus on this is that getting the fundamentals right matters more than chasing the latest gear upgrade. Good pedals and a stable rig make a bigger difference to lap time consistency than a higher torque wheel base or a more expensive wheel. Starting with those basics and building up from there tends to give the best results per dollar spent.
 
There are a few solutions I've thought about, but ideally want something permanent and presentable:
Where is the rig and tv located? is the room used just for sim racing? Or is it shared and you're constrained what you can put in there and how it looks?

The general consensus on this is that getting the fundamentals right matters more than chasing the latest gear upgrade. Good pedals and a stable rig make a bigger difference to lap time consistency than a higher torque wheel base or a more expensive wheel. Starting with those basics and building up from there tends to give the best results per dollar spent.
We have a saying in german: "Nachts ist es kälter als draussen". It means something like "at night it's colder than outside".
People use it when a conversation or argument changes it's direction and the topics/arguments have nothing in common.
 
Furniture riser blocks under the feet of the TV and/or the tv cabinet
New TV cabinet
New TV riser stand
One of these things.
Other than that you could lower your seat without altering the position if possible,
How would lowering his seat help? He can't see over the top of his wheel as it is.
The general consensus on this is that getting the fundamentals right matters more than chasing the latest gear upgrade. Good pedals and a stable rig make a bigger difference to lap time consistency than a higher torque wheel base or a more expensive wheel. Starting with those basics and building up from there tends to give the best results per dollar spent.
Are you an AI? This has nothing to do with the topic.
 
Where is the rig and tv located? is the room used just for sim racing? Or is it shared and you're constrained what you can put in there and how it looks?


We have a saying in german: "Nachts ist es kälter als draussen". It means something like "at night it's colder than outside".
People use it when a conversation or argument changes it's direction and the topics/arguments have nothing in common.
It's a shared space so I don't want to turn it into just a SIM rig. I got the playseat trophy as it's easy to just slide out the way. The TV is only out by maybe 4 inches
 
If you don't want to do anything to turn it into a sim room, you could buy something like a soundbase, like a TV sound bar but it's a big base you can put the TV directly on top of. Though it looks like you might already have a sound bar or similar. Alternatively, you could just build or buy a riser box/stand you can put under the TV that can easily be removed if you didn't want it there all the time.
 
As a cheap test I took delivery of some stackable furniture risers. These have raised it about 2 inches. Despite looking unstable, giving the TV a firm push and it doesn't move as they're semi rubberised. I think longer term I'll just buy a plank of wood, cut it into smaller sections, glue them together and paint in grey emulsion. The second photo is what I see from the seat with the risers in place. A small sliver of the screen is still blocked but it will do for now.
 

Attachments

  • IMG_20260801_142857935.webp
    IMG_20260801_142857935.webp
    78.4 KB · Views: 1
  • IMG_20260801_142852172.webp
    IMG_20260801_142852172.webp
    53.1 KB · Views: 1
Back