ARL Wednesday Nights - Gr4 Championship

  • Thread starter Thread starter TexasJDC
  • 7,278 comments
  • 417,377 views
2DF19B2B-EDFC-41BB-95B4-EDDFF1DADFF7.gif
Ah hell yeah. It’s race day!
 
Last edited:
Lobby B is open
0475-4369-3482-5742-8548
 
Not gonna make it tonight sorry
 
Congrats to the winners tonight. I should change my “sponsor” from raybrig to some kind of bottle company since i seam to bottle these races up. Was fun tonight anyways. See you next week hopefully.
 
maybe one of these tracks the mazda will shine at... not really sure which one it will be but i cant wait to full send into the outside wall turn 1 at tokyo express long course. i ran great laps last night, better than any practiced... still about 1.5 off of samhaim... . and that staying on the track the whole race part is still needing some attention....

i think i pulled a 1:12.7 in the second heat race but could do nothing for all my other 14's and 15's laps... haha... oh well onto the thunderdome... i mean tskuba
 
Last edited:
maybe one of these tracks the mazda will shine at... not really sure which one it will be but i cant wait to full send into the outside wall turn 1 at tokyo express long course. i ran great laps last night, better than any practiced... still about 1.5 off of samhaim... . and that staying on the track the whole race part is still needing some attention....

i think i pulled a 1:12.7 in the second heat race but could do nothing for all my other 14's and 15's laps... haha... oh well onto the thunderdome... i mean tskuba

Lol a second of that guy is nothing to be down about I remember when we met he could lap me in what felt like 5 turns
 
Lol a second of that guy is nothing to be down about I remember when we met he could lap me in what felt like 5 turns

oh its not a down note... i got closer to him in the race than in practice so im excited about that... luckily i know in racing my only real competition is me... once im good there...y'all watch out..... or something...
 
T300 Update: Problem solved after borrowing a neighbour's computer to run an update on the firmware for the wheel. All good. And just when I was starting to look forward to a new Fanatec Elite. lol. Thanks to all for your suggestions, most helpful, and more importantly, successful.

Honourable Mention goes to Rob for his kind offer. And, by the way it actually came with free shipping. lol. However, if you read the fine print it may no be quite the bargain after all. lol. You're a good man @Rob Pardun .
I have a t300rs servo that needs fan I got a new base you are welcome to it free free-free free free
 
T300 Update: Problem solved after borrowing a neighbour's computer to run an update on the firmware for the wheel. All good. And just when I was starting to look forward to a new Fanatec Elite. lol. Thanks to all for your suggestions, most helpful, and more importantly, successful.

Honourable Mention goes to Rob for his kind offer. And, by the way it actually came with free shipping. lol. However, if you read the fine print it may no be quite the bargain after all. lol. You're a good man @Rob Pardun .
Thank you for the words ARL helping ARL See you on the track
 
T300 Update: Problem solved after borrowing a neighbour's computer to run an update on the firmware for the wheel. All good. And just when I was starting to look forward to a new Fanatec Elite. lol. Thanks to all for your suggestions, most helpful, and more importantly, successful.

Honourable Mention goes to Rob for his kind offer. And, by the way it actually came with free shipping. lol. However, if you read the fine print it may no be quite the bargain after all. lol. You're a good man @Rob Pardun .

Yeah they actually should be updated pretty regularly.
 
Nice title change! Threw me off for like 2 minutes but then. Ohhhh I get it.

did a few races last night. I think if people work on turn 3? (1st left hand hair pin) and turn 4(the right hander under the bridge) then really work on 5 to 6 (last left hand sweeper) it will be some awesome racing. I was able to cleanly hold up a couple of people and make them work to pass and then hound them for a couple laps before they cleaned up and got away....

The reason I bring up those turns is because they are often the ones that look like you can make a pass. And lend you to going full send and playing in sand Or taking out three cars.... So just work on different lines into and out of those turns cause those will be where you make up a lot of time and will watch others go sailing off. Also turn 5 is probably the most important turn. Getting slowed down soon enough so you can roll through and get into the gAs early you will find .5’s of seconds!!!’ Hehe. If you make it out to the out side curb before you get on the gas your lap is gone.... anyways. Have a happy Friday and everyone stay safe!!

my times mid 58’s for fast lap and high 59’s low 1min lap avg. I got about 10 laps before I really had to come In for new softs. Hope this helps!!!
 
This may be the track for the Mazda to shine brick!
 
Nice title change! Threw me off for like 2 minutes but then. Ohhhh I get it.

did a few races last night. I think if people work on turn 3? (1st left hand hair pin) and turn 4(the right hander under the bridge) then really work on 5 to 6 (last left hand sweeper) it will be some awesome racing. I was able to cleanly hold up a couple of people and make them work to pass and then hound them for a couple laps before they cleaned up and got away....

The reason I bring up those turns is because they are often the ones that look like you can make a pass. And lend you to going full send and playing in sand Or taking out three cars.... So just work on different lines into and out of those turns cause those will be where you make up a lot of time and will watch others go sailing off. Also turn 5 is probably the most important turn. Getting slowed down soon enough so you can roll through and get into the gAs early you will find .5’s of seconds!!!’ Hehe. If you make it out to the out side curb before you get on the gas your lap is gone.... anyways. Have a happy Friday and everyone stay safe!!

my times mid 58’s for fast lap and high 59’s low 1min lap avg. I got about 10 laps before I really had to come In for new softs. Hope this helps!!!

But I always go full send !!!!!!
 
89E1EE9A-1BDA-48D3-BDFD-1A4B8994287E.gif
The only way that Mazda will shine is if you take it to @Nick Cannella and let him take care of it for ya.

I will say there are some positives to this quarantine on a nice day like today. Get to drive by and see people cleaning their cars and stuff. Like wow we actually have time to take care of **** now. Unfortunately they mainly also are this
89E1EE9A-1BDA-48D3-BDFD-1A4B8994287E.gif
 
Back