Clubsport v3 pedals dimensions?

[Elaphe]

I need the size of the throttle pedal and the height of the others pedals, measured from the base to the top. Thanx.

 

[grog]

I need the size of the throttle pedal and the height of the others pedals, measured from the base to the top. Thanx.

I can check this when I get home later, but you might need to interpret my measurement a bit as I have my pedals tilted at an angle. Laying them flat might work (but probably hurt as you'll be overextending your ankle) but I think almost all users end up tilting them if they can. Also there are 2 pedals you can use, the large stainless steel ones or the smaller rounded plastic ones.

On Fanatec's site go to the V3 pedal page and click on downloads then check the manual, it has a lot of dimensions and info that may help you.

 

[grog]

So with the small plastic pedals they are 9 1/4 tall, this is with the pedal faces mounted in the middle location, they can be raised or lowered 3/4".
The flat metal pedal faces sit at roughly the same height with the gas having up and down adjustment (3/4") while the clutch and brake have side to side adjustment along with the up and down.

On top of all that theres a tilt and height adjustment bracket which is optional, but all my measurements were taken while using this bracket set as high as it goes and tilted as far forward as possible.

I hope that helps