Does anyone have any licence plate SVG’s?

  • Thread starter Thread starter Colin87
  • 50 comments
  • 20,493 views
Colin87

Colin87

Messages
66
England
England
Following a gratefully received licence plate on my other thread for the DB5, I wondered if anyone had any generic plates in SVG format? I like to put plates on my car to make them look a bit more realistic for photos- I’m not too good at creating my own due to a lack of talent, does anyone have any that they could share? Primarily after UK plates but USA etc is cool too. Thanks!
 
I make a lot of plates, and always plates that belong to its real counterpart.

I usually make Norwegian plates, but I’ve done all sorts of plates. It’s no secret how I do it, I look up the car on finn.no and then I find the VIN if the plates aren’t listed, then I make the plates with the corresponding font. I like seeing the car with the plates though, so I get the right letter spacing.

And when the number is uploaded to the game, I start assembling. Background color first, then a black border, then the country tag, then the number. I dislike adding it all in one decal, in case I need to reposition something slightly.

F4D47015-6E30-47AE-AF7F-89BED37194CC.jpeg
65A13BE0-B680-4B9F-9153-77EFE2EECA2F.jpeg
E41C02BE-6261-4296-A526-BE8A3E740E47.jpeg
15B31FBC-3D9A-4AA3-B071-FED2EFF51D62.jpeg
7952B190-753E-4683-8373-5CC2BEEC40FF.jpeg
22BBBFD9-CCDF-4578-B0FD-F22E627B2178.jpeg
3DA33BCD-894C-4915-B5AA-9B658C8645CB.jpeg
 
Last edited:
Nuschel01
:gtpflag:
Click to expand...
Thank you very much for that- the only issue I have is when I scale the numbers down to fit- say both at 9%- some look bigger than others. For example here.. any pointers would be gratefully received!
C40B93B2-6F6E-4476-8C45-5CE3BF03230C.jpeg
 
They should have the same height. Obviously width varies for the letters.
 
Nuschel01
They should have the same height. Obviously width varies for the letters.
Click to expand...
I’ve just used the scale tool you created and it worked perfectly! Thank you so much.. will post results shortly!
 
Would anyone be able to turn these into SVG files for me, please?

Square Plate.pngPersonal Plate.png
 

Attachments

I actually made few license plate decals before, mostly for various Arabian countries since I'm from Bahrain and most local plates i've seen in GT Sport weren't that good.


1648327145722.png


1648327163312.png

1648327377180.png

1648327297605.png


My first attempts were terrible since i tried to lazily use image tracing within Adobe Illustrator but eventually i made these two plates manually by hand and it looks really good imo.

I was going to make more as people requested me to but the 1.07 update have turned me off completely.

I'm mentioning all of this just in case i come back to working on them in my free time and maybe even start taking requests again.
 
Last edited:
Nuschel01
:gtpflag:Hi, I/ve made up the attached plates, would like to add a GB or Cross of Saint George on the left side of the plate but can't find anything suitable. That aside the attached are still too big can you please advise how that they could be shrunk to fit into the 15kb .svg requirement for use in GT7? I would appreciate your help and advice.
Click to expand...
 

Attachments

Hmm, just check if there's any decals shared for that. I only have what I sent :)

Size can be reduced by running them through Xerocho's SVGOMG. Thought there shouldn't be any that are too big :confused:
 
Last edited:
Nuschel01
Hmm, just check if there's any decals shared for that. I only have what I sent :)

Size can be reduced by running them through Xerocho's SVGOMG. Thought there shouldn't be any that are too big :confused:
Click to expand...
Thanks for the reply. On my PC hey are 22.kb. What am I doing wrong?
 
Steelmonkey
On my PC hey are 22.kb
Click to expand...
All of them? I uploaded them all to GTS at some point and don't remember having to run them through SVG OMG :confused: I can't check from my phone currently sadly.
 
Sorry to hijack this thread but are there any SVG makers who "specialise" in plates? I want a bunch for my car using localised variations of MIDNIGHT - not sure if anyone is making them or knows of any good templates to make them from?

I was hoping to make some UK, FR, DE, IT, JP, NZ, AU and USA plates.
 
Steelmonkey
Thank you, Thank you, such a simple solution
Click to expand...
You got it. If you are replicating plates just allign the text you write on top of a photo of said plates and then you don’t have to think about spacing etc.
 
Last edited:
syntex123
Get the Charles Wright font. Simply write it out in an editor of choice. Convert text to curves and voilà.
Click to expand...
MidnightRun85
Sorry to hijack this thread but are there any SVG makers who "specialise" in plates? I want a bunch for my car using localised variations of MIDNIGHT - not sure if anyone is making them or knows of any good templates to make them from?

I was hoping to make some UK, FR, DE, IT, JP, NZ, AU and USA plates.
Click to expand...
Here's a simple quick attempt, let me know what you think.
 

Attachments

Back